7d92f5a22793b132f4a3a80243fc17ede67e84e3
1 /* GNU AGPLv3 (or later at your option)
2 see bottom for more license info */
4 /* riser foot for raising bathroom shelves */
9 // how much higher the shelf needs to be
11 // radius of foot of shelf actually measured with calipers
12 foot_radius_measured
= 42 / 2;
13 foot_radius
= foot_radius_measured
+ fudge
;
16 module
ring_2d(inner_radius
, outer_radius
) {
19 circle(inner_radius
); } }
21 module
foot_riser(foot_radius
, extra_height
) {
22 foot_surround_height
= 50;
23 outer_radius
= foot_radius
+ wall_thickness
;
25 linear_extrude(height
= extra_height
) {
26 circle(foot_radius
); }
27 // surround the foot so it stays on riser
28 linear_extrude(height
= extra_height
+ foot_surround_height
) {
29 ring_2d(foot_radius
, outer_radius
); } }
32 This file is part of 3d-printables.
34 3d-printables is free software: you can redistribute it and/or modify
35 it under the terms of the GNU Affero General Public License as published by
36 the Free Software Foundation, either version 3 of the License, or
37 (at your option) any later version.
39 3d-printables is distributed in the hope that it will be useful,
40 but WITHOUT ANY WARRANTY; without even the implied warranty of
41 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
42 GNU Affero General Public License for more details.
44 You should have received a copy of the GNU Affero General Public License
45 along with challenge-bot. If not, see <http://www.gnu.org/licenses/>.