give lip to hold in penny and bearing

[ozzloy@gmail.com/3d-printables] / spin-data.scad

diff --git a/spin-data.scad b/spin-data.scad
index ae9c89e198d22bbcb5d470a78d66a5ee231bb044..e9a80b7f63e4d0312d731331c0cec86d44a19518 100644 (file)
--- a/spin-data.scad
+++ b/spin-data.scad
@@ -2,25 +2,129 @@
    see bottom for more license info */
 
 /* spin thing that erin likes */
-$fn = 50;
+$fn = 500;
 
 weight = "penny";
 // weight = "608zz";
+bearing = "608zz";
+weight_lip_thickness = 1;
 wall_thickness = 2;
+penny_thickness = 1.52;
+spinner_height = penny_thickness * 5 + 2;
 _608zz_radius = 22;
+_608zz_thickness = 7;
 penny_radius = 19.05 / 2;
-penny_thickness = 1.52;
 weight_radius = (weight == "penny") ? penny_radius : _608zz_radius;
+weight_thickness = (weight == "penny") ?
+     penny_thickness * 5 : _608zz_thickness;
+bearing_radius = (bearing == "608zz") ? _608zz_radius : 1/0;
+bearing_thickness = (bearing == "608zz") ? _608zz_thickness : 1/0;
 arms = 3;
 
-module spin(weight_radius, arms, wall_thickness) {
-  _608zz_holder_radius = _608zz_radius + wall_thickness;
-  circle(_608zz_holder_radius);
+module ring(outer_radius, inner_radius) {
+  difference() {
+    circle(outer_radius);
+    circle(inner_radius); } }
+
+module spin_2d(weight_radius,
+               arms,
+               wall_thickness,
+               bearing_radius) {
+  bearing_holder_radius = bearing_radius + wall_thickness;
   weight_holder_radius = weight_radius + wall_thickness;
+
+  ring(bearing_holder_radius, bearing_radius);
+
+  /*
+   * imagine a triangle with one point at the origin, at the
+   * center of the spinning bearing holder, one point in the middle of
+   * the weight holder, and one point at the center of a circle tangent
+   * to the first two, called the joiner circle.
+   * the radius of the joiner circle is the arithmetic average of the
+   * weight holder and bearing holder.
+   */
+  joiner_radius = (bearing_holder_radius + weight_holder_radius) / 2;
+  /* a: goes between the center of the weight holder and the center of
+     the joiner circle. */
+  a = joiner_radius + weight_holder_radius;
+  /* b: length of the base, which goes along the x-axis between
+     the origin and the center of the weight holder. */
+  b = weight_holder_radius + bearing_holder_radius;
+  /* c: goes between origin and joiner circle. */
+  c = bearing_holder_radius + joiner_radius;
+
+  /* A: angle at the origin, between the base and segment from origin
+     to center of joiner circle.
+     it is calculated using law of cosines, given the lengths of
+     all 3 sides of the triangle. */
+  A = acos((pow(b, 2) + pow(c, 2) - pow(a, 2)) / (2 * b * c));
+  /* find the center of the joiner circle */
+  joiner_x = cos(A) * c;
+  joiner_y = sin(A) * c;
+
+  /* find the points where the circles meet */
+  bearing_joiner_point = [cos(A) * bearing_holder_radius,
+                          sin(A) * bearing_holder_radius];
+  bearing_weight_point = [bearing_holder_radius, 0];
+  /* C: angle between x-axis and line-segment between center of weight
+     holder and center of joiner.
+     it is calculated using law of cosines, given the lengths of
+     all 3 sides of the triangle. */
+  C = acos((pow(a, 2) + pow(b, 2) - pow(c, 2)) / (2 * a * b));
+  weight_joiner_point = [b - cos(C) * weight_holder_radius,
+                         sin(C) * weight_holder_radius];
   for(arm = [0 : arms - 1]) {
     rotate(arm * 360.0 / arms) {
-      translate([weight_holder_radius + _608zz_holder_radius, 0]) {
-        circle(weight_holder_radius); } } } }
+      difference() {
+        polygon([bearing_weight_point,
+                 bearing_joiner_point,
+                 weight_joiner_point]);
+        translate([joiner_x, joiner_y]) {
+          circle(joiner_radius); }
+        translate([weight_holder_radius + bearing_holder_radius, 0]) {
+          circle(weight_holder_radius); } }
+      mirror(v = [0, 1, 0]) {
+        difference() {
+          polygon([bearing_weight_point,
+                   bearing_joiner_point,
+                   weight_joiner_point]);
+          translate([joiner_x, joiner_y]) {
+            circle(joiner_radius); }
+        translate([weight_holder_radius + bearing_holder_radius, 0]) {
+          circle(weight_holder_radius); } } }
+      translate([weight_holder_radius + bearing_holder_radius, 0]) {
+        ring(weight_holder_radius, weight_radius); } } } }
+
+module spin(weight_radius,
+            weight_thickness,
+            weight_lip_thickness,
+            arms,
+            wall_thickness,
+            bearing_radius,
+            bearing_thickness,
+            spinner_height) {
+  /* TODO: make window size parameter */
+  /* TODO: rethink how lips are done */
+  /* TODO: right now, weight is assumed to be thicker than bearing*/
+  bearing_lip_thickness = (spinner_height - bearing_thickness) / 2;
+  linear_extrude(height = weight_lip_thickness) {
+    spin_2d(weight_radius - 1,
+            arms,
+            wall_thickness + 1,
+            bearing_radius - 1); }
+  linear_extrude(height = bearing_lip_thickness) {
+    ring(bearing_radius, bearing_radius - 1); }
+  linear_extrude(height = spinner_height) {
+    spin_2d(weight_radius, arms, wall_thickness, bearing_radius); }
+  translate([0, 0, spinner_height - bearing_lip_thickness]) {
+    linear_extrude(height = bearing_lip_thickness) {
+    ring(bearing_radius, bearing_radius - 1); } }
+  translate([0, 0, spinner_height - weight_lip_thickness]) {
+    linear_extrude(height = weight_lip_thickness) {
+      spin_2d(weight_radius - 1,
+              arms,
+              wall_thickness + 1,
+              bearing_radius - 1); } } }
 
 /*
   This file is part of 3d-printables.