X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=3d-printables%2Fcaster-standoff-data.scad;h=828114be982255f0bd1d819281aa5c0540c8228d;hb=7f4b90d2e4d652dbe276a323a87b4529e278f17b;hp=e1e46e83073ecb27bb2ece3f544e83c5715f0978;hpb=3d90aff00bdea5d4a525d006d5390f9c5a25c635;p=challenge-bot

diff --git a/3d-printables/caster-standoff-data.scad b/3d-printables/caster-standoff-data.scad
index e1e46e8..828114b 100644
--- a/3d-printables/caster-standoff-data.scad
+++ b/3d-printables/caster-standoff-data.scad
@@ -1,8 +1,11 @@
+/*
+  Copyright (C) 2015 Daniel Watson
+  See the end of the file for license conditions.
+*/
 // challenge-bot
 // GNU AGPLv3 (or later at your option)
-// project available at these locations:
-// https://gitorious.org/ozzloy/challenge-bot
-// https://github.com/waynegramlich/challenge-bot
+// project available here:
+// https://challenge-bot.com/
 
 use <oshw.scad>
 
@@ -10,7 +13,7 @@ use <oshw.scad>
 $fn = 60;
 
 /* measured with calipers */
-ball_diameter = 11 + 0.75; // extra bit added for printing imprecision
+ball_diameter = 11 + 1.1; // extra bit added for printing imprecision
 ball_radius = ball_diameter / 2;
 
 standoff_height = 60; // kyle eyeballed
@@ -34,13 +37,14 @@ caster_flange_width = 20.32;  // 0.800 inches
 
 deck_pitch = 25.4; // measured center to center on grid on pegboard
 deck_flange_height = 2.9464;
-deck_flange_screw_radius = 3.556 / 2;  // For #6 machine screws
+deck_flange_screw_radius = 3.556 / 2 + 0.4;  // For #6 machine screws
 deck_flange_radius = (deck_pitch) / 2 + deck_flange_screw_radius + 3;
 
 module deck_flange() {
   deck_pitch_diagonal = sqrt(2 * pow(deck_pitch, 2));
+  cylinder(h = deck_flange_height, r = holder_radius + 2);
   difference() {
-    scale([0.35, 0.35, 1]) {
+    scale([0.40, 0.40, 1]) {
       linear_extrude(height = deck_flange_height) {
         oshw(); } }
     for (ii = [-1, 1]) {
@@ -93,3 +97,20 @@ module caster_standoff() {
     deck_flange_reinforcement(); }
   translate([0, 0, standoff_lower_portion_height]) {
     ball_holder(); } }
+
+/*
+  This file is part of challenge-bot.
+
+  Challenge-bot is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  GNU Affero Emacs is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/