X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=3d-printables%2Fcaster-standoff.scad;h=0e745fde8777a1edcf3ec171032d2cae1dc6b259;hb=61dbbe496780764c3985f04182bc044ba847b770;hp=e18f3a5ad3297df4b625fb58a728ab56a29daf13;hpb=b0052be59dbad9a02006fe0c5e7312f01f45d81e;p=challenge-bot

diff --git a/3d-printables/caster-standoff.scad b/3d-printables/caster-standoff.scad
index e18f3a5..0e745fd 100644
--- a/3d-printables/caster-standoff.scad
+++ b/3d-printables/caster-standoff.scad
@@ -8,17 +8,19 @@
 $fn = 60;
 
 /* measured with calipers */
-ball_diameter = 12.7 + 0.5; // extra bit added for printing imprecision
+ball_diameter = 12.7 + 0.80; // extra bit added for printing imprecision
 ball_radius = ball_diameter / 2;
 
 wall_thickness = 1;
-holder_height = (25 / 32) * ball_diameter + wall_thickness;
+holder_floor = 3;
+holder_arms_length = 10;
+holder_height = holder_floor + holder_arms_length + (3 / 4) * ball_diameter;
 
 holder_radius = ball_radius + wall_thickness;
 holder_diameter = holder_radius * 2;
 
 standoff_radius = holder_radius; // 0.580 / 2 inches from spec sheet
-standoff_height = 48; // eyeballed
+standoff_height = 48 - holder_height; // eyeballed
 
 // eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
 caster_flange_height = 5;
@@ -58,10 +60,10 @@ module ball_holder(){
   gap = wall_thickness * 4;
   difference (){
     cylinder(r = holder_radius, h = holder_height);
-    translate([0, 0, ball_radius + wall_thickness]){
+    translate([0, 0, ball_radius + holder_floor + holder_arms_length]){
       sphere(r = ball_radius);}
-    translate([0, 0, holder_height / 2 + wall_thickness]){
-      cube([holder_diameter + 0.1, gap, holder_height],
+    translate([0, 0, holder_floor + (holder_height - holder_floor) / 2 + 0.5]){
+      cube([holder_diameter + 0.1, gap, holder_height - holder_floor + 0.1],
            center = true);}}}
 
 module caster_standoff(){