X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=3d-printables%2Fcaster-standoff.scad;h=fbf81cc0415d75d85539f6d16898f33782db4460;hb=aa19128c3fb1d542bf87ee0b04245b4fa94b471e;hp=994417ab696851c023f92403022a38d33259d2b4;hpb=ea0327710707bb772d02908b2e6df824e3417e02;p=challenge-bot

diff --git a/3d-printables/caster-standoff.scad b/3d-printables/caster-standoff.scad
index 994417a..fbf81cc 100644
--- a/3d-printables/caster-standoff.scad
+++ b/3d-printables/caster-standoff.scad
@@ -8,19 +8,22 @@
 $fn = 60;
 
 /* measured with calipers */
-ball_diameter = 12.7 + 0.75; // extra bit added for printing imprecision
+ball_diameter = 12.7 + 0.80; // extra bit added for printing imprecision
 ball_radius = ball_diameter / 2;
 
+standoff_height = 65; // kyle eyeballed
+
 wall_thickness = 1;
 holder_floor = 3;
 holder_arms_length = 10;
-holder_height = holder_floor + holder_arms_length + (25 / 32) * ball_diameter;
+holder_height =
+  holder_floor + holder_arms_length + (11 / 16) * ball_diameter;
 
 holder_radius = ball_radius + wall_thickness;
 holder_diameter = holder_radius * 2;
 
 standoff_radius = holder_radius; // 0.580 / 2 inches from spec sheet
-standoff_height = 48; // eyeballed
+standoff_lower_portion_height = standoff_height - holder_height;
 
 // eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
 caster_flange_height = 5;
@@ -67,14 +70,13 @@ module ball_holder(){
            center = true);}}}
 
 module caster_standoff(){
-  cylinder(h = standoff_height,
+  cylinder(h = standoff_lower_portion_height,
            r = standoff_radius);
   deck_flange();
   for(ii = [0:3]){
     rotate([0, 0, 45 + 90 * ii])
       deck_flange_reinforcement();}
-  translate([0, 0, standoff_height]){
+  translate([0, 0, standoff_lower_portion_height]){
     ball_holder();}}
 
-//caster_standoff();
-ball_holder();
+caster_standoff();