X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=3d-printables%2Fmateria-101.ini;h=af1fe8e7e4968ba72d4f0608d8aed413a8058134;hb=ee3cb08f184933e6cc98e8c8c6611eefba06f930;hp=715a58d41074338de95e4b880481b2059a25e847;hpb=0ed638d59152a90af7bd5db81149a5abf61c66c0;p=challenge-bot

diff --git a/3d-printables/materia-101.ini b/3d-printables/materia-101.ini
index 715a58d..af1fe8e 100644
--- a/3d-printables/materia-101.ini
+++ b/3d-printables/materia-101.ini
@@ -1,6 +1,6 @@
 # generated by Slic3r 1.2.10-dev on Mon Aug  3 08:56:06 2015
 avoid_crossing_perimeters = 0
-bed_shape = 0x0,112x0,112x100,0x100
+bed_shape = 0x0,140x0,140x100,0x100
 bed_temperature = 0
 before_layer_gcode =
 bottom_solid_layers = 3
@@ -50,8 +50,8 @@ infill_extruder = 1
 infill_extrusion_width = 0.6
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 40
+infill_overlap = 100%
+infill_speed = 20
 interface_shells = 0
 layer_gcode =
 layer_height = 0.1
@@ -95,7 +95,7 @@ solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.4
-solid_infill_speed = 40
+solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
 start_gcode = M204 S1800\nG28 ;Home all axis\nT0\nM106 S127 ; EXTRUDER FAN ON\nG1 Z10 F1000\nG92 E0\nM117 Printing...