X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=caster-standoff.scad;h=47fb8102db382ac02ba53039d80532fc1b8918fd;hb=136c3fb0a0a16662d111e20e9d04e508ebfe462c;hp=ce84d2512cfd1f2f85eb0064491d3b7666b5a2a7;hpb=969236b88ae42dd6e3d82d77933cb57c070e2b42;p=challenge-bot

diff --git a/caster-standoff.scad b/caster-standoff.scad
index ce84d25..47fb810 100644
--- a/caster-standoff.scad
+++ b/caster-standoff.scad
@@ -11,7 +11,7 @@ nut_short_side = 4.7; // from calipers
 nut_height = 1.6; // from calipers
 
 // eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
-caster_flange_height = 2.9464;
+caster_flange_height = 5;
 caster_flange_width = 20.32;  // 0.800 inches
 caster_flange_screw_radius = 2.286 / 2;  // 0.090 inches
 caster_flange_screw_length = 8; // eyeballed
@@ -23,7 +23,7 @@ deck_flange_radius = deck_grid_width * 1.22;
 
 module deck_flange(){
   difference(){
-    cylinder(h = deck_flange_height, r = deck_flange_radius);
+    cylinder(h = deck_flange_height, r = deck_flange_radius, $fn = 50);
     for(ii = [-1, 1]){
       translate([deck_grid_width * ii, 0, -.1])
         cylinder(h = deck_flange_height * 1.1,
@@ -60,11 +60,11 @@ module caster_flange_screws(){
 module caster_flange(){
   side_radius = caster_flange_width / 2 - standoff_radius;
   hull(){
-    cylinder(h = caster_flange_height, r = standoff_radius);
+    cylinder(h = caster_flange_height, r = standoff_radius, $fn = 100);
     translate([standoff_radius, 0, 0])
-      cylinder(h = caster_flange_height, r = side_radius);
+      cylinder(h = caster_flange_height, r = side_radius, $fn = 40);
     translate([-standoff_radius, 0, 0])
-      cylinder(h = caster_flange_height, r = side_radius);}}
+      cylinder(h = caster_flange_height, r = side_radius, $fn = 40);}}
 
 module nut(size, height){
     width = size/1.75;
@@ -72,24 +72,52 @@ module nut(size, height){
 
 module nuts(){
   translate([standoff_radius, 0, nut_height/2])
-    nut(nut_short_side, nut_height);
+    nut(nut_short_side, nut_height + .1);
   translate([-standoff_radius, 0, nut_height/2])
-    nut(nut_short_side, nut_height);}
+    nut(nut_short_side, nut_height + .1);}
 
-module caster_standoff(){
+module _2_screw (){
+  //measured with calipers
+  screw_length = 8;
+  thread_radius = 2.17 / 2 - 0.1; // subtract 0.1 to make squeeze fit
+  head_height = 1.8;
+  head_radius = 4.1 / 2;
+  cylinder(r = thread_radius, h = screw_length, $fn = 20);
+  cylinder(r = head_radius, h = head_height, $fn = 20);}
+
+module caster_standoff_deck_side(){
   difference(){
-    union(){
-      cylinder(h = standoff_height, r = standoff_radius);
-      translate([0, 0, standoff_height - caster_flange_height])
-        caster_flange();}
+    cylinder(h = standoff_height - caster_flange_height,
+             r = standoff_radius,
+             $fn = 50);
     translate([0, 0, standoff_height - caster_flange_screw_length * 1.1 + 0.1])
       scale([1, 1, 1.1])
         caster_flange_screws();
     translate([0, 0, standoff_height - (caster_flange_height + nut_height)])
-      nuts();}
+      nuts();
+    translate([0, 0, standoff_height]){
+      // make hole to get to screw head depth
+      cylinder(r = 4.1 / 2, h = 3, center = true, $fn = 20);
+      translate([0, 0, -0.7])
+        rotate([180, 0, 0])
+          _2_screw(r = 0.5, h = 5, $fn = 20);}}
   deck_flange();
   for(ii = [0:3]){
     rotate([0, 0, 45 + 90 * ii])
       deck_flange_reinforcement();}}
 
-caster_standoff();
+module caster_standoff_caster_side(){
+  difference(){
+    caster_flange();
+    translate([0, 0, caster_flange_height - 0.7]){
+      rotate([180, 0, 0]){
+        _2_screw();}}
+    // make hole to get to screw head
+    translate([0, 0, caster_flange_height - 0.8]){
+      cylinder(r = 4.1 / 2, h = 10, $fn = 20);}
+    translate([0, 0, -.1]){
+      caster_flange_screws();}}}
+
+caster_standoff_deck_side();
+translate([caster_flange_width / 2 + deck_flange_radius + 1, 0, 0]){
+  caster_standoff_caster_side();}