X-Git-Url: http://challenge-bot.com/repos/?a=blobdiff_plain;f=curriculum%2Fchallenge-bot.scm;h=7b6eef3f0bd507aa186e67bb0a9bfed885e77930;hb=d08737561143e6976048bb82189bbec63278458b;hp=004b8672c25e9d18cd5762bfe96ef08b0be58c25;hpb=58c778a180b52a268a73fa7576c8e935035c8f1e;p=challenge-bot

diff --git a/curriculum/challenge-bot.scm b/curriculum/challenge-bot.scm
index 004b867..7b6eef3 100644
--- a/curriculum/challenge-bot.scm
+++ b/curriculum/challenge-bot.scm
@@ -5,18 +5,82 @@
  :title [challenge-bot]
  (chapter
   :title [mechanical]
+  (p [let's build your robot!])
   (section
    :title [arduino to deck]
-   (subsection
-    :title [arduino placement])
+   (p [let's attach the arduino to the deck.])
+   (subsection
+    :title [required materials]
+    (p [you will need the things in this picture.
+            ,(figure :legend "arduino to deck / required materials"
+                     (image :file "arduino-to-deck/0-required-materials.png"))
+            ,(itemize
+              (item [medical kit with bandages])
+              (item [safety goggles])
+              (item [drill bit \(we will determine size in a moment\)])
+              (item [drill])
+              (item [alan wrench])
+              (item [wood block])
+              (item [arduino])
+              (item [#6-32x3/8\", four of them])
+              (item [robot deck, the white thing with a grid of holes1]))]))
    (subsection
     :title [first hole]
     (subsubsection
-     :title [choosing drill bit])
+     :title [choosing drill bit]
+     (p [choosing the right drill bit depends on what job you are doing.
+                  right now, we are making holes for screws to hold the
+                  arduino to the deck.
+                  this means the hole needs to be big enough for the
+                  screw body to fit through.
+                  we want the screw to stay put once it's in place.
+                  we also want the drill bit to be smaller than the
+                  diameter of the thread.
+                  the screw was chosen so that the hole on the arduino
+                  was bigger than the body and smaller than the thread.
+                  we will choose the biggest drill bit that fits through
+                  the hole on the arduino.])
+     (p [here's a cross section of a screw in the deck]
+        (figure :legend "screw cross section"
+                (image :file
+                       "arduino-to-deck/screw-cross-section.png"))))
+    (subsubsection
+     :title [inserting drill bit]
+     (p (figure :legend "arduino to deck / insert bit"
+                (image :file "arduino-to-deck/1-insert-bit.png"))
+        [insert the drill bit into the teeth of the drill.
+                insert it far enough that the teeth will clamp on the
+                smooth part of the bit when they are tightened.])
+     (p (figure
+         :legend "arduino to deck / twist tighten drill teeth"
+         (image :file "arduino-to-deck/2-twist-tighten-drill-teeth.png"))
+        [while holding the drill bit, twist end of the drill to tighten
+               the teeth.
+               make sure that the teeth end up gripping the flat part of
+               the drill bit.]))
     (subsubsection
-     :title [inserting drill bit])
+     :title [holding drill]
+     (p [hold the drill with one hand on the handle and trigger.
+              put the other hand on the orange nozzle, before the
+              black spinning part.]))
     (subsubsection
-     :title [holding drill])
+     :title [arduino placement]
+     (p [the arduino should be placed as shown in this picture.]
+        (figure :legend "arduino to deck / place arduino"
+                (image :file "arduino-to-deck/3-place-arduino.png")))
+     (p [here's a closeup]
+        (figure :legend "arduino to deck / place arduino closeup"
+                (image :file
+                       "arduino-to-deck/4-place-arduino-closeup.png"))
+        [the picture above shows where to place the arduino on the deck.
+             the arduino should line up with the holes on the deck.
+             this alignment line is highlighted in pink.
+             on the arduino, there's a hole on the top left, between the
+             orange reset button and black headers.
+             the green circle shows where the hole is.
+             the blue box encloses the arduino hole and two deck holes.
+             place the arduino hole mid-way between the two
+             deck holes.]))
     (subsubsection
      :title [drilling]))
    (subsection
@@ -26,7 +90,10 @@
      (p [the "#6" part of "#6-32x3/8\"" is how big around the bolt is.
              it is related to wire gauge.
              bigger numbers mean larger screw.
-             smaller numbers means smaller screws.])
+             smaller numbers means smaller screws.]
+        (figure :legend "arduino to deck / #6-32 screw"
+                (image :file
+                       "arduino-to-deck/6-32-screw.png")))
      (p [check
          ,(itemize
            (item