[challenge-bot] / 3d-printables / makerfarm-i3-v-8in.ini

# generated by hand, probably with slic3r 1.1 or something

# [filament:makerfarm-i3-v-8in]
bed_temperature = 70
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 1.75
first_layer_bed_temperature = 80
first_layer_temperature = 235
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 30
temperature = 225

# [presets]
# filament = makerfarm-i3-v-8in.ini
# print = makerfarm-i3-v-8in.ini
# printer = makerfarm-i3-v-8in.ini

# [print:makerfarm-i3-v-8in]
avoid_crossing_perimeters = 1
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 30%
gap_fill_speed = 20
gcode_comments = 1
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_height = 0.2
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process = 
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 130
xy_size_compensation = 0

# [printer:makerfarm-i3-v-8in]
bed_shape = 0x0,200x0,200x200,0x200
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = 
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
pressure_advance = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0

# [settings]
# autocenter = 1
# mode = expert

# [simple]
avoid_crossing_perimeters = 1
bed_shape = 0x0,200x0,200x200,0x200
bed_temperature = 70
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
fill_density = 20%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 80
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 30%
first_layer_temperature = 230
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 1
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 10
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode = 
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 0
notes = 
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process = 
pressure_advance = 0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 225
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 130
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0
Commit	Line	Data
d555667b	1	# generated by hand, probably with slic3r 1.1 or something
3d90aff0	2
eaa6ba7e	3	# [filament:makerfarm-i3-v-8in]
3d90aff0	4	bed_temperature = 70
	5	bridge_fan_speed = 100
	6	cooling = 1
	7	disable_fan_first_layers = 1
	8	extrusion_multiplier = 1
eaa6ba7e	9	fan_always_on = 1
3d90aff0	10	fan_below_layer_time = 60
	11	filament_diameter = 1.75
	12	first_layer_bed_temperature = 80
	13	first_layer_temperature = 235
	14	max_fan_speed = 100
	15	min_fan_speed = 35
	16	min_print_speed = 10
	17	slowdown_below_layer_time = 30
	18	temperature = 225
	19
eaa6ba7e	20	# [presets]
	21	# filament = makerfarm-i3-v-8in.ini
	22	# print = makerfarm-i3-v-8in.ini
	23	# printer = makerfarm-i3-v-8in.ini
3d90aff0	24
eaa6ba7e	25	# [print:makerfarm-i3-v-8in]
3d90aff0	26	avoid_crossing_perimeters = 1
	27	bottom_solid_layers = 3
	28	bridge_acceleration = 0
	29	bridge_flow_ratio = 1
	30	bridge_speed = 60
	31	brim_width = 0
	32	complete_objects = 0
	33	default_acceleration = 0
	34	dont_support_bridges = 1
	35	external_fill_pattern = rectilinear
	36	external_perimeter_extrusion_width = 0
	37	external_perimeter_speed = 70%
	38	external_perimeters_first = 0
	39	extra_perimeters = 1
	40	extruder_clearance_height = 20
	41	extruder_clearance_radius = 20
	42	extrusion_width = 0
	43	fill_angle = 45
	44	fill_density = 20%
d555667b	45	fill_pattern = honeycomb
3d90aff0	46	first_layer_acceleration = 0
	47	first_layer_extrusion_width = 200%
	48	first_layer_height = 0.35
	49	first_layer_speed = 30%
	50	gap_fill_speed = 20
	51	gcode_comments = 1
	52	infill_acceleration = 0
	53	infill_every_layers = 1
	54	infill_extruder = 1
	55	infill_extrusion_width = 0
	56	infill_first = 0
	57	infill_only_where_needed = 0
	58	infill_speed = 60
	59	interface_shells = 0
	60	layer_height = 0.2
	61	min_skirt_length = 0
	62	notes =
	63	only_retract_when_crossing_perimeters = 1
	64	ooze_prevention = 0
	65	output_filename_format = [input_filename_base].gcode
	66	overhangs = 1
	67	perimeter_acceleration = 0
	68	perimeter_extruder = 1
	69	perimeter_extrusion_width = 0
	70	perimeter_speed = 30
	71	perimeters = 3
	72	post_process =
	73	raft_layers = 0
	74	resolution = 0
	75	seam_position = aligned
	76	skirt_distance = 6
	77	skirt_height = 1
	78	skirts = 1
	79	small_perimeter_speed = 30
	80	solid_infill_below_area = 70
	81	solid_infill_every_layers = 0
	82	solid_infill_extruder = 1
	83	solid_infill_extrusion_width = 0
	84	solid_infill_speed = 60
	85	spiral_vase = 0
	86	standby_temperature_delta = -5
	87	support_material = 0
	88	support_material_angle = 0
	89	support_material_enforce_layers = 0
	90	support_material_extruder = 1
	91	support_material_extrusion_width = 0
	92	support_material_interface_extruder = 1
	93	support_material_interface_layers = 3
	94	support_material_interface_spacing = 0
	95	support_material_interface_speed = 100%
	96	support_material_pattern = pillars
	97	support_material_spacing = 2.5
	98	support_material_speed = 60
	99	support_material_threshold = 0
	100	thin_walls = 1
	101	threads = 2
	102	top_infill_extrusion_width = 0
	103	top_solid_infill_speed = 50
	104	top_solid_layers = 3
	105	travel_speed = 130
	106	xy_size_compensation = 0
	107
eaa6ba7e	108	# [printer:makerfarm-i3-v-8in]
3d90aff0	109	bed_shape = 0x0,200x0,200x200,0x200
	110	end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
	111	extruder_offset = 0x0
	112	gcode_flavor = reprap
	113	layer_gcode =
eaa6ba7e	114	nozzle_diameter = 0.4
3d90aff0	115	octoprint_apikey =
	116	octoprint_host =
	117	pressure_advance = 0
	118	retract_before_travel = 2
	119	retract_layer_change = 1
	120	retract_length = 1
	121	retract_length_toolchange = 10
	122	retract_lift = 0
	123	retract_restart_extra = 0
	124	retract_restart_extra_toolchange = 0
	125	retract_speed = 30
	126	start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
	127	toolchange_gcode =
	128	use_firmware_retraction = 0
	129	use_relative_e_distances = 0
	130	use_volumetric_e = 0
	131	vibration_limit = 0
	132	wipe = 0
	133	z_offset = 0
	134
eaa6ba7e	135	# [settings]
	136	# autocenter = 1
	137	# mode = expert
3d90aff0	138
eaa6ba7e	139	# [simple]
3d90aff0	140	avoid_crossing_perimeters = 1
	141	bed_shape = 0x0,200x0,200x200,0x200
	142	bed_temperature = 70
	143	bottom_solid_layers = 3
	144	bridge_acceleration = 0
	145	bridge_fan_speed = 100
	146	bridge_flow_ratio = 1
	147	bridge_speed = 60
	148	brim_width = 0
	149	complete_objects = 0
	150	cooling = 1
	151	default_acceleration = 0
	152	disable_fan_first_layers = 1
	153	dont_support_bridges = 1
	154	duplicate_distance = 6
	155	end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
	156	external_fill_pattern = rectilinear
	157	external_perimeter_extrusion_width = 0
	158	external_perimeter_speed = 70%
	159	external_perimeters_first = 0
	160	extra_perimeters = 1
	161	extruder_clearance_height = 20
	162	extruder_clearance_radius = 20
	163	extruder_offset = 0x0
	164	extrusion_axis = E
	165	extrusion_multiplier = 1
	166	extrusion_width = 0
	167	fan_always_on = 0
	168	fan_below_layer_time = 60
	169	filament_diameter = 1.75
	170	fill_angle = 45
eaa6ba7e	171	fill_density = 20%
d555667b	172	fill_pattern = honeycomb
3d90aff0	173	first_layer_acceleration = 0
eaa6ba7e	174	first_layer_bed_temperature = 80
3d90aff0	175	first_layer_extrusion_width = 200%
eaa6ba7e	176	first_layer_height = 0.35
3d90aff0	177	first_layer_speed = 30%
	178	first_layer_temperature = 230
	179	gap_fill_speed = 20
	180	gcode_arcs = 0
9b0248bf	181	gcode_comments = 1
3d90aff0	182	gcode_flavor = reprap
	183	infill_acceleration = 0
	184	infill_every_layers = 10
	185	infill_extruder = 1
	186	infill_extrusion_width = 0
	187	infill_first = 0
	188	infill_only_where_needed = 0
	189	infill_speed = 60
	190	interface_shells = 0
	191	layer_gcode =
	192	layer_height = 0.3
	193	max_fan_speed = 100
	194	min_fan_speed = 35
	195	min_print_speed = 10
	196	min_skirt_length = 0
	197	notes =
	198	nozzle_diameter = 0.4
	199	octoprint_apikey =
	200	octoprint_host =
	201	only_retract_when_crossing_perimeters = 1
	202	ooze_prevention = 0
	203	output_filename_format = [input_filename_base].gcode
	204	overhangs = 1
	205	perimeter_acceleration = 0
	206	perimeter_extruder = 1
	207	perimeter_extrusion_width = 0
	208	perimeter_speed = 30
	209	perimeters = 3
	210	post_process =
	211	pressure_advance = 0
	212	raft_layers = 0
	213	resolution = 0
	214	retract_before_travel = 2
	215	retract_layer_change = 1
	216	retract_length = 1
	217	retract_length_toolchange = 10
	218	retract_lift = 0
	219	retract_restart_extra = 0
	220	retract_restart_extra_toolchange = 0
	221	retract_speed = 30
	222	seam_position = aligned
	223	skirt_distance = 6
	224	skirt_height = 1
	225	skirts = 1
	226	slowdown_below_layer_time = 30
	227	small_perimeter_speed = 30
	228	solid_infill_below_area = 70
	229	solid_infill_every_layers = 0
	230	solid_infill_extruder = 1
	231	solid_infill_extrusion_width = 0
	232	solid_infill_speed = 60
	233	spiral_vase = 0
	234	standby_temperature_delta = -5
	235	start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
	236	support_material = 0
	237	support_material_angle = 0
	238	support_material_enforce_layers = 0
	239	support_material_extruder = 1
	240	support_material_extrusion_width = 0
	241	support_material_interface_extruder = 1
	242	support_material_interface_layers = 3
	243	support_material_interface_spacing = 0
	244	support_material_interface_speed = 100%
	245	support_material_pattern = pillars
246	support_material_spacing = 2.5
247	support_material_speed = 60
248	support_material_threshold = 0
249	temperature = 225
250	thin_walls = 1
251	threads = 2
252	toolchange_gcode =
253	top_infill_extrusion_width = 0
254	top_solid_infill_speed = 50
255	top_solid_layers = 3
256	travel_speed = 130
257	use_firmware_retraction = 0
258	use_relative_e_distances = 0
259	use_volumetric_e = 0
260	vibration_limit = 0
261	wipe = 0
262	xy_size_compensation = 0
263	z_offset = 0