define wiring in separate file

[challenge-bot] / 3d-printables / materia-101.ini

# generated by Slic3r 1.2.10-dev on Tue Aug 11 15:59:58 2015
avoid_crossing_perimeters = 0
bed_shape = 0x0,140x0,140x100,0x100
bed_temperature = 0
before_layer_gcode =
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 0.9
bridge_speed = 40
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 2
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0\nM190 S0\nG1 Z100 F1000\nG1 X100 Y100 F3000\nM84
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.35
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_diameter = 1.75
fill_angle = 45
fill_density = 20%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.3
first_layer_speed = 20
first_layer_temperature = 230
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 1
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.6
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 100%
infill_speed = 40
interface_shells = 0
layer_gcode =
layer_height = 0.1
max_fan_speed = 100
max_print_speed = 80
max_volumetric_speed = 0
min_fan_speed = 100
min_print_speed = 15
min_skirt_length = 25
nozzle_diameter = 0.35
octoprint_apikey =
octoprint_host =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.3
perimeter_speed = 35
perimeters = 4
post_process =
pressure_advance = 0
raft_layers = 0
resolution = 0.01
retract_before_travel = 0
retract_layer_change = 0
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
seam_position = aligned
skirt_distance = 4
skirt_height = 1
skirts = 2
slowdown_below_layer_time = 10
small_perimeter_speed = 35
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ;Home all axis\nT0\nM106 S0 ;EXTRUDER FAN ON\nG1 Z10 F1000\nG1 X100 Y100 F3000\nM104 S[first_layer_temperature] \nM109 S[first_layer_temperature]\nG92 E0
support_material = 0
support_material_angle = 45
support_material_contact_distance = 0.2
support_material_enforce_layers = 3
support_material_extruder = 1
support_material_extrusion_width = 0.25
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 1
support_material_interface_speed = 40
support_material_pattern = rectilinear-grid
support_material_spacing = 5
support_material_speed = 40
support_material_threshold = 45
temperature = 215
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0.25
top_solid_infill_speed = 40
top_solid_layers = 4
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0