challenge-bot.com Git - challenge-bot/blob - 3d-printables/materia-101-caster-standoff.ini

   1 # generated by Slic3r 1.2.10-dev on Tue Aug 11 15:59:58 2015
   2 avoid_crossing_perimeters = 0
   3 bed_shape = 0x0,140x0,140x100,0x100
   4 bed_temperature = 0
   5 before_layer_gcode =
   6 bottom_solid_layers = 3
   7 bridge_acceleration = 0
   8 bridge_fan_speed = 100
   9 bridge_flow_ratio = 0.9
  10 bridge_speed = 40
  11 brim_width = 0
  12 complete_objects = 0
  13 cooling = 1
  14 default_acceleration = 0
  15 disable_fan_first_layers = 2
  16 dont_support_bridges = 1
  17 duplicate_distance = 6
  18 end_gcode = M104 S0\nM190 S0\nG1 Z100 F1000\nG1 X100 Y100 F3000\nM84
  19 external_fill_pattern = rectilinear
  20 external_perimeter_extrusion_width = 0
  21 external_perimeter_speed = 30
  22 external_perimeters_first = 0
  23 extra_perimeters = 0
  24 extruder_clearance_height = 20
  25 extruder_clearance_radius = 20
  26 extruder_offset = 0x0
  27 extrusion_axis = E
  28 extrusion_multiplier = 1
  29 extrusion_width = 0.35
  30 fan_always_on = 1
  31 fan_below_layer_time = 60
  32 filament_colour = #FFFFFF
  33 filament_diameter = 1.75
  34 fill_angle = 45
  35 fill_density = 20%
  36 fill_pattern = honeycomb
  37 first_layer_acceleration = 0
  38 first_layer_bed_temperature = 0
  39 first_layer_extrusion_width = 0.4
  40 first_layer_height = 0.3
  41 first_layer_speed = 20
  42 first_layer_temperature = 230
  43 gap_fill_speed = 20
  44 gcode_arcs = 0
  45 gcode_comments = 1
  46 gcode_flavor = reprap
  47 infill_acceleration = 0
  48 infill_every_layers = 1
  49 infill_extruder = 1
  50 infill_extrusion_width = 0.6
  51 infill_first = 0
  52 infill_only_where_needed = 0
  53 infill_overlap = %
  54 infill_speed = 40
  55 interface_shells = 0
  56 layer_gcode =
  57 layer_height = 0.1
  58 max_fan_speed = 100
  59 max_print_speed = 80
  60 max_volumetric_speed = 0
  61 min_fan_speed = 100
  62 min_print_speed = 15
  63 min_skirt_length = 25
  64 nozzle_diameter = 0.35
  65 octoprint_apikey =
  66 octoprint_host =
  67 only_retract_when_crossing_perimeters = 1
  68 ooze_prevention = 0
  69 output_filename_format = [input_filename_base].gcode
  70 overhangs = 1
  71 perimeter_acceleration = 0
  72 perimeter_extruder = 1
  73 perimeter_extrusion_width = 0.3
  74 perimeter_speed = 35
  75 perimeters = 4
  76 post_process =
  77 pressure_advance = 0
  78 raft_layers = 0
  79 resolution = 0.01
  80 retract_before_travel = 0
  81 retract_layer_change = 0
  82 retract_length = 2
  83 retract_length_toolchange = 10
  84 retract_lift = 0
  85 retract_restart_extra = 0
  86 retract_restart_extra_toolchange = 0
  87 retract_speed = 25
  88 seam_position = random
  89 skirt_distance = 4
  90 skirt_height = 1
  91 skirts = 2
  92 slowdown_below_layer_time = 10
  93 small_perimeter_speed = 35
  94 solid_infill_below_area = 0
  95 solid_infill_every_layers = 0
  96 solid_infill_extruder = 1
  97 solid_infill_extrusion_width = 0.4
  98 solid_infill_speed = 40
  99 spiral_vase = 0
 100 standby_temperature_delta = -5
 101 start_gcode = G28 ;Home all axis\nT0\nM106 S0 ;EXTRUDER FAN ON\nG1 Z10 F1000\nG1 X100 Y100 F3000\nM104 S[first_layer_temperature] \nM109 S[first_layer_temperature]\nG92 E0
 102 support_material = 0
 103 support_material_angle = 45
 104 support_material_contact_distance = 0.2
 105 support_material_enforce_layers = 3
 106 support_material_extruder = 1
 107 support_material_extrusion_width = 0.25
 108 support_material_interface_extruder = 1
 109 support_material_interface_layers = 3
 110 support_material_interface_spacing = 1
 111 support_material_interface_speed = 40
 112 support_material_pattern = rectilinear-grid
 113 support_material_spacing = 5
 114 support_material_speed = 40
 115 support_material_threshold = 45
 116 temperature = 215
 117 thin_walls = 1
 118 threads = 2
 119 toolchange_gcode =
 120 top_infill_extrusion_width = 0.25
 121 top_solid_infill_speed = 40
 122 top_solid_layers = 4
 123 travel_speed = 100
 124 use_firmware_retraction = 0
 125 use_relative_e_distances = 0
 126 use_volumetric_e = 0
 127 vibration_limit = 0
 128 wipe = 0
 129 xy_size_compensation = 0
 130 z_offset = 0