update attach caster to deck checklist

[challenge-bot] / mechanical-checklist.org

diff --git a/mechanical-checklist.org b/mechanical-checklist.org
index 4e2a7c2fda9c07f9c4dccadee2defc28940226d3..fcf2aaff0220bf2456afdaaf3364abc1d8862684 100644 (file)
--- a/mechanical-checklist.org
+++ b/mechanical-checklist.org
@@ -163,28 +163,40 @@
       - [ ] hold locknut over last bolt with pliers and tighten
             it from below with allen wrench
 * attach caster to deck
-  - [ ] locate materials
-    - [ ] 3x 6-32x5/8 inch bolt
-    - [ ] 3x 6-32 lock nut
-    - [ ] 3x #6 washer
-    - [ ] caster holder
-    - [ ] caster ball
-  - [ ] locate tools
-    - [ ] magnetic tray
-    - [ ] socket wrench
-    - [ ] 5/16 inch socket
-    - [ ] 5/64 inch hex wrench
-  - [ ] attach first bolt
-    - [ ] put #6 washer on 6-32 bolt
-    - [ ] put bolt through hole 4,1 on deck grid from top
-    - [ ] bring middle hole of caster holder towards that bolt
-    - [ ] finger tighten a locking nut onto the bolt
-      it will be tightened more after getting all the bolts through the
-      caster holder
-  - [ ] put a washer on another bolt, put that bolt through hole
-    4,2 on deck and finger tighten nut to it
-  - [ ] do the same through hole 5,1
-  - [ ] use socket, socket wrench and hex wrench to tighten all 3 bolts
+  - [ ] watch "03 caster intro"
+  - [ ] finger tighten first bolt
+    - [ ] locate materials, from bag "3. caster"
+      - [ ] 1x 6-32x5/8 inch bolt
+      - [ ] 1x 6-32 lock nut
+      - [ ] 1x #6 washer
+    - [ ] locate tools
+      - [ ] fingers
+    - [ ] watch "03 first bolt finger tighten"
+    - [ ] put washer on bolt
+    - [ ] put bolt through deck in one of 4 holes at center back of deck
+    - [ ] put caster holder onto bolt
+    - [ ] finger tighten locknut onto bolt
+  - [ ] finger tighten remaining bolts
+    - [ ] locate materials
+      - [ ] 2x 6-32x5/8 inch bolt
+      - [ ] 2x 6-32 lock nut
+      - [ ] 2x #6 washer
+    - [ ] locate tools
+      - [ ] fingers
+    - [ ] watch "03 finger tighten all bolts"
+    - [ ] for each bolt, do the following
+      - [ ] put washer on bolt
+      - [ ] put bolt through deck in one of 4 holes at center back of deck
+      - [ ] put caster holder onto bolt
+      - [ ] finger tighten locknut onto bolt
+  - [ ] finish tightening with tools
+    - [ ] locate tools
+      - [ ] 5/16 socket
+      - [ ] socket wrench
+      - [ ] 5/64 allen wrench
+    - [ ] watch "03 socket tighten first bolt" and
+          "03 socket tightened complete"
+    - [ ] tighten the locknuts onto the bolts to hold the caster in place
 * attach wires to motor
   - [ ] locate materials
     - [ ] 2x motor