X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=blobdiff_plain;f=3d-printables%2Fcaster-standoff-data.scad;h=8b39e1ddff8b56dafe50dbe881ae3b6c6c17eae6;hp=803fb6049952e599f54d27785de5999fd51142ff;hb=ce941be740b45737d19eaa5c726b2f99efabe0b9;hpb=25cd00a6b1d4f62e856346393972298f01dbabe3

diff --git a/3d-printables/caster-standoff-data.scad b/3d-printables/caster-standoff-data.scad
index 803fb60..8b39e1d 100644
--- a/3d-printables/caster-standoff-data.scad
+++ b/3d-printables/caster-standoff-data.scad
@@ -10,20 +10,26 @@
 use <oshw.scad>
 
 // use 10 ish for development, 60 or so for printing
-$fn = 60;
+$fn = 100;
 
 /* measured with calipers */
-ball_diameter = 11 + 0.75; // extra bit added for printing imprecision
+ball_diameter = 11 + 0.85; // extra bit added for printing imprecision
 ball_radius = ball_diameter / 2;
 
 standoff_height = 60; // kyle eyeballed
 
+/*
+  notes on printing:
+  * slow down just before top solid infill of deck flange
+  * slow down just before switching from solid to forked portion of standoff
+ */
+
 gap = 3;
 wall_thickness = 1;
 holder_floor = 3;
 holder_arms_length = 20;
 holder_height =
-  holder_floor + holder_arms_length + (11 / 16) * ball_diameter;
+  holder_floor + holder_arms_length + (3 / 4) * ball_diameter;
 
 holder_radius = ball_radius + wall_thickness;
 holder_diameter = holder_radius * 2;
@@ -37,13 +43,14 @@ caster_flange_width = 20.32;  // 0.800 inches
 
 deck_pitch = 25.4; // measured center to center on grid on pegboard
 deck_flange_height = 2.9464;
-deck_flange_screw_radius = 3.556 / 2;  // For #6 machine screws
+deck_flange_screw_radius = 3.556 / 2 + 0.4;  // For #6 machine screws
 deck_flange_radius = (deck_pitch) / 2 + deck_flange_screw_radius + 3;
 
 module deck_flange() {
   deck_pitch_diagonal = sqrt(2 * pow(deck_pitch, 2));
+  cylinder(h = deck_flange_height, r = holder_radius + 2);
   difference() {
-    scale([0.35, 0.35, 1]) {
+    scale([0.40, 0.40, 1]) {
       linear_extrude(height = deck_flange_height) {
         oshw(); } }
     for (ii = [-1, 1]) {