X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=blobdiff_plain;f=3d-printables%2Fsonar-binder-clip-holder-data.scad;h=d9b20eacb8f1bdedd5c9f924981c8456bfee764e;hp=94ba32471e88e4f631baf3c5dc4cda83ce5c4dd4;hb=ce941be740b45737d19eaa5c726b2f99efabe0b9;hpb=cc1b210f89ab95676e4c324c75f64dcf92df2bda

diff --git a/3d-printables/sonar-binder-clip-holder-data.scad b/3d-printables/sonar-binder-clip-holder-data.scad
index 94ba324..d9b20ea 100644
--- a/3d-printables/sonar-binder-clip-holder-data.scad
+++ b/3d-printables/sonar-binder-clip-holder-data.scad
@@ -16,10 +16,15 @@
   of it.
 */
 
-$fn = 50;
+/*
+ *  * TODO make hole for thing between cans
+ *  * TODO make hole for screws in corners of pcb
+ */
+
+$fn = 150;
 
 sonar_diameter_measured = 15.82;
-sonar_diameter_print_fudge = 0.5;
+sonar_diameter_print_fudge = 0.4;
 sonar_diameter = sonar_diameter_measured + sonar_diameter_print_fudge;
 sonar_radius = sonar_diameter / 2;
 
@@ -30,17 +35,28 @@ between_sonar_centers = sonar_diameter + between_sonar_cans;
 //  from one sensor to the next, so this allows for that variance.
 between_sonar_centers_variation = 2;
 
-wall_thickness = 3;
+wall_thickness = 4;
 
-screw_radius_measured = 2.8;
-screw_radius_print_fudge = 0.3;
+screw_diameter_measured = 3.45;
+screw_radius_measured = screw_diameter_measured / 2;
+screw_radius_print_fudge = 0.4;
 screw_radius = screw_radius_measured + screw_radius_print_fudge;
 
-sonar_binder_clip_holder_height = 2;
+sonar_binder_clip_holder_height = 3;
 
-module sonar_sensors_2d(sonar_radius,
-                        between_sonar_centers,
-                        between_sonar_centers_variation) {
+/*
+  sonar holder
+    sonar holder outline
+    sonar holder holes
+  binder clip holder
+    binder clip holder outline
+    binder clip holder holes
+  sonar binder clip joiner
+ */
+
+module sonar_holder_holes_2d(sonar_radius,
+                             between_sonar_centers,
+                             between_sonar_centers_variation) {
   hull(){
     circle(sonar_radius);
     translate([between_sonar_centers_variation, 0]){
@@ -48,71 +64,81 @@ module sonar_sensors_2d(sonar_radius,
   translate([between_sonar_centers, 0]) {
     circle(sonar_radius); } }
 
-module sonar_holder_outline_2d(sonar_radius,
-                               between_sonar_centers,
-                               wall_thickness) {
-  holder_radius = sonar_radius + wall_thickness;
-  holder_diameter = holder_radius * 2;
+module sonar_holder_outline_2d(holder_radius,
+                               between_sonar_centers) {
+  smaller_radius = holder_radius / 4;
+  inside_radius = holder_radius - smaller_radius;
   hull() {
-    circle(holder_radius);
-    translate([between_sonar_centers - sonar_radius - wall_thickness,
-               -holder_radius]) {
-      square(holder_diameter); } } }
+    offset(r = smaller_radius){
+      square([inside_radius * 2, inside_radius * 2], center=true); }
+    translate([between_sonar_centers, 0]) {
+      circle(holder_radius); } } }
 
-module sonar_holder_2d(sonar_radius,
+module sonar_holder_2d(holder_radius,
                        between_sonar_centers,
-                       between_sonar_centers_variation,
-                       wall_thickness) {
+                       sonar_radius,
+                       between_sonar_centers_variation) {
   difference() {
-    sonar_holder_outline_2d(sonar_radius,
-                            between_sonar_centers,
-                            wall_thickness);
-    sonar_sensors_2d(sonar_radius,
-                     between_sonar_centers,
-                     between_sonar_centers_variation); } }
-
-module binder_clip_holder_2d(binder_clip_holder_length,
-                             screw_radius,
-                             holder_radius){
+    sonar_holder_outline_2d(holder_radius,
+                            between_sonar_centers);
+    sonar_holder_holes_2d(sonar_radius,
+                          between_sonar_centers,
+                          between_sonar_centers_variation); } }
+
+module binder_clip_holder_holes_2d(screw_radius) {
+  circle(screw_radius); }
+
+module binder_clip_holder_outline_2d(holder_radius) {
+  smaller_radius = holder_radius / 4;
+  inside_radius = holder_radius - smaller_radius;
+  offset(r = smaller_radius){
+    square([inside_radius * 2, inside_radius * 2], center=true); } }
+
+module binder_clip_holder_2d(holder_radius,
+                             screw_radius) {
   difference() {
-  square([binder_clip_holder_length, holder_radius * 2]);
-  translate([binder_clip_holder_length - holder_radius, holder_radius]) {
-    circle(screw_radius); } } }
+    binder_clip_holder_outline_2d(holder_radius);
+    binder_clip_holder_holes_2d(screw_radius); } }
+
+module binder_clip_holder(holder_radius,
+                          screw_radius,
+                          sonar_binder_clip_holder_height) {
+  linear_extrude(height = sonar_binder_clip_holder_height) {
+    binder_clip_holder_2d(holder_radius,
+                          screw_radius); } }
 
 module sonar_binder_clip_holder_2d(sonar_radius,
                                    between_sonar_centers,
                                    between_sonar_centers_variation,
+                                   screw_radius,
                                    wall_thickness) {
-  sonar_holder_2d(sonar_radius,
-                  between_sonar_centers,
-                  between_sonar_centers_variation,
-                  wall_thickness);
-  holder_radius = sonar_radius + wall_thickness;
-  binder_clip_holder_length = 2 * holder_radius;
-  translate([between_sonar_centers + holder_radius, -holder_radius]){
-    binder_clip_holder_2d(binder_clip_holder_length,
-                       screw_radius,
-                       holder_radius); } }
+     holder_radius = sonar_radius + wall_thickness;
+     sonar_holder_2d(holder_radius,
+                     between_sonar_centers,
+                     sonar_radius,
+                     between_sonar_centers_variation);
+     arm_length = between_sonar_centers + 2 * holder_radius;
+     difference() {
+          translate([0, -holder_radius]) {
+               square([arm_length, holder_radius * 2]); }
+          sonar_holder_outline_2d(holder_radius, between_sonar_centers);
+          translate([arm_length, 0]) {
+               binder_clip_holder_outline_2d(holder_radius); } }
+     translate([arm_length, 0]) {
+          binder_clip_holder_2d(holder_radius, screw_radius); } }
 
 module sonar_binder_clip_holder(sonar_radius,
                                 between_sonar_centers,
                                 between_sonar_centers_variation,
+                                screw_radius,
                                 wall_thickness,
                                 sonar_binder_clip_holder_height) {
   linear_extrude(height = sonar_binder_clip_holder_height) {
     sonar_binder_clip_holder_2d(sonar_radius,
                                 between_sonar_centers,
                                 between_sonar_centers_variation,
-                                wall_thickness); } }
-
-module binder_clip_holder(binder_clip_holder_length,
-                          screw_radius,
-                          holder_radius,
-                          binder_clip_holder_height) {
-     linear_extrude(height = binder_clip_holder_height) {
-          binder_clip_holder_2d(binder_clip_holder_length,
                                 screw_radius,
-                                holder_radius); } }
+                                wall_thickness); } }
 
 /*
   This file is part of challenge-bot.