X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=blobdiff_plain;f=3d-printables%2Fsonar-table-top-holder-data.scad;h=5b17cbfd4d289340c8d5e9a114a9f0c1f7a3c816;hp=e349b7b1da0613a9c0600b7d855928638dea65d9;hb=78a38e00ac608e1cc096c3e3eefccfb3be721587;hpb=e7a438f996bdaff34b9795b7dbe64e1aba1cf2bd

diff --git a/3d-printables/sonar-table-top-holder-data.scad b/3d-printables/sonar-table-top-holder-data.scad
index e349b7b..5b17cbf 100644
--- a/3d-printables/sonar-table-top-holder-data.scad
+++ b/3d-printables/sonar-table-top-holder-data.scad
@@ -14,8 +14,6 @@
 
 $fn = 60;
 
-include <oshw-data.scad>
-
 // 3/16 inch in mm deck_depth = 4.7625;
 // 1/4 inch in mm = 6.35
 // subtract a little to be a squeeze fit
@@ -75,8 +73,8 @@ module sonar_holder() {
         polygon([[                 0, 0],
                  [sonar_holder_depth, 0],
                  [sonar_holder_depth, sonar_holder_width / 2],
-                 [                 0,
-                                   sonar_holder_width / 2 + sonar_holder_depth]]); }
+                 [                 0, sonar_holder_width / 2
+                                      + sonar_holder_depth]]); }
       translate([0, (sonar_holder_width + sonar_holder_depth) / 2, 0]) {
         cube([sonar_holder_depth / 2,
               (sonar_holder_width - sonar_holder_depth) / 2 + 0.8,
@@ -87,31 +85,6 @@ module sonar_holder() {
                    [sonar_holder_depth / 2 + 1.7, 4],
                    [sonar_holder_depth / 2 + 1.7, 0]]); } } } } }
 
-module deck_holder() {
-  deck_holder_width = sonar_holder_width - deck_depth;
-  deck_holder_height = sonar_holder_depth * 2 + deck_depth;
-  linear_extrude(height = deck_holder_width) {
-    difference() {
-      square([deck_holder_length, deck_holder_height]);
-      translate([sonar_holder_depth, sonar_holder_depth]) {
-        square(deck_depth); }
-      translate([deck_holder_height, sonar_holder_depth]) {
-        square([deck_holder_length - (deck_holder_height), deck_depth]); } } }
-  translate([deck_holder_length - oshw_dy * 0.05, 0, deck_holder_width / 2])
-  scale([0.1, 1, 0.1])
-  rotate(v = [1, 0, 0], a = 90)
-  rotate(90)
-  linear_extrude(height = 0.5)
-  oshw();
-  translate([deck_holder_length - oshw_dy * 0.05,
-             deck_holder_height + 0.5,
-             deck_holder_width / 2])
-  rotate(v = [1, 0, 0], a = 90)
-  rotate(90)
-  scale([0.1, 0.1, 1])
-  linear_extrude(height = 0.5)
-  oshw(); }
-
 module corner_rounder_2d(radius, corner_name = "top-left") {
   rotate_for_corner = (corner_name == "top-left") ? 0 :
                       ((corner_name == "top-right") ? -90 :