X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=blobdiff_plain;f=3d-printables%2Fwheel.scad;h=405a382ecacd821908bd915ba9a0b64b943dba8e;hp=87ec2865c38c456da267159bce0b19b41291c92d;hb=ebd451f42e6bdd3ac42322886c20b43e157fea86;hpb=fa6c6440266670ea11fda3d8bb5a9d48553e00d2

diff --git a/3d-printables/wheel.scad b/3d-printables/wheel.scad
index 87ec286..405a382 100644
--- a/3d-printables/wheel.scad
+++ b/3d-printables/wheel.scad
@@ -1,73 +1,37 @@
+/*
+  Copyright (C) 2015 Daniel Watson
+  See the end of the file for license conditions.
+*/
 // challenge-bot
 // GNU AGPLv3 (or later at your option)
-// project available at these locations:
-// https://gitorious.org/ozzloy/challenge-bot
-// https://github.com/waynegramlich/challenge-bot
+// project available here:
+// https://challenge-bot.com/
 
 // use $fn = 20 while developing, 100 when about to print
 //  20 will make previews fast
 //  100 will make printing smooth
-$fn = 20;
-
-wheel_depth = 6;
-wheel_radius = 68/2;
-
-module encoder_shaft(){
-  // measured with calipers, checked against the motor shaft
-  motor_shaft_big = 3.7; // radius, gets doubled in cylinder
-  motor_shaft_small = 4.8; // total length of box
-  motor_shaft_length = wheel_depth * 3 / 4;
-
-  intersection(){
-    cylinder(h = motor_shaft_length, r = motor_shaft_big, center = true);
-    // x direction is multiplied by 2 because the radius of the cylinder
-    // goes in both directions.  the extra .1 is for overlap
-    cube([motor_shaft_big * 2.1, motor_shaft_small, motor_shaft_length],
-         center = true);}}
-
-module mounting_screw(){
-  cylinder(h = wheel_depth * 1.1, r = 1, center = true);}
-
-module wheel(){
-  translate([0, 0, wheel_depth / 2]){
-    difference(){
-      cylinder(h = wheel_depth, r = wheel_radius, center = true);
-      translate([0, 0, wheel_depth / 4]){
-        scale([1, 1, 1.1]){
-          encoder_shaft();}}
-      mounting_screw();
-      for(i = [1 : 5]){
-        rotate(i * 360/5, [0, 0, 1]){
-          translate([0, 0, -0.6 * wheel_depth])
-            between_spokes();}}
-      translate([0, 0, wheel_depth / 4]){
-        difference(){
-          cylinder(h = wheel_depth / 1.2,
-                   r = 0.85 * wheel_radius,
-                   center = true);
-          cylinder(h = wheel_depth / 1.2,
-                   r = 0.23 * wheel_radius,
-                   center = true);}}}}}
-
-module wheel_block(){
-  cube([wheel_radius, wheel_radius, wheel_depth]);}
-
-module pie_slice(){
-  intersection(){
-    translate([0, 0, wheel_depth / 2]){
-      cylinder(h = wheel_depth,
-               r = 0.85 * wheel_radius,
-               center = true);}
-    translate([0, wheel_radius * 0.3, 0]){
-      rotate([0, 0, (360 / 5) / 2]){
-        intersection(){
-          wheel_block();
-          rotate([0, 0, 90 - 360 / 5])
-            wheel_block();}}}}}
-
-module between_spokes(){
-  minkowski(){
-    pie_slice();
-    cylinder(h = wheel_depth / 2, r = 1);}}
-
-wheel();
+include <wheel-data.scad>
+
+wheel(wheel_radius,
+      rim_width,
+      motor_shaft_radius,
+      motor_shaft_flat_width,
+      wall_width,
+      tread_radius);
+
+/*
+  This file is part of challenge-bot.
+
+  Challenge-bot is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  GNU Affero Emacs is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/