X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=blobdiff_plain;f=3d-printables%2Fwheel.scad;h=405a382ecacd821908bd915ba9a0b64b943dba8e;hp=a37008333ae1207805cfa88ead7d60b11277d41e;hb=ebd451f42e6bdd3ac42322886c20b43e157fea86;hpb=180a0f6f6e33818372b49e01931ce8264f838cbc

diff --git a/3d-printables/wheel.scad b/3d-printables/wheel.scad
index a370083..405a382 100644
--- a/3d-printables/wheel.scad
+++ b/3d-printables/wheel.scad
@@ -1,126 +1,37 @@
+/*
+  Copyright (C) 2015 Daniel Watson
+  See the end of the file for license conditions.
+*/
 // challenge-bot
 // GNU AGPLv3 (or later at your option)
-// project available at these locations:
-// https://gitorious.org/ozzloy/challenge-bot
-// https://github.com/waynegramlich/challenge-bot
+// project available here:
+// https://challenge-bot.com/
 
 // use $fn = 20 while developing, 100 when about to print
 //  20 will make previews fast
 //  100 will make printing smooth
-$fn = 100;
-
-include <wheel-dimensions.scad>
-use <qr.scad>
-
-module mounting_screw_flat() {
-  circle(0.9); }
-
-module motor_shaft_flat(radius, flat_width) {
-  intersection() {
-    circle(radius);
-    square([flat_width, radius * 2], center = true); } }
-
-module motor_shaft(radius,
-                   flat_width,
-                   shaft_length) {
-  linear_extrude(height = shaft_length) {
-    motor_shaft_flat(radius, flat_width); } }
-
-module rim(radius, wall_width, wheel_width) {
-  linear_extrude(height = wheel_width) {
-    difference() {
-      circle(radius);
-      circle(radius - wall_width); } } }
-
-module motor_shaft_holder_flat(radius, flat_width, wall_width) {
-  difference() {
-    motor_shaft_flat(radius + wall_width,
-                     flat_width + wall_width);
-    motor_shaft_flat(radius, flat_width); } }
-
-module motor_shaft_holder(radius, flat_width, wall_width, height) {
-  linear_extrude(height = height) {
-    motor_shaft_holder_flat(radius, flat_width, wall_width); } }
-
-module tread(wheel_radius, tread_radius) {
-  rotate_extrude(convexity = 10) {
-    translate([wheel_radius, 0]) {
-      circle(tread_radius); } } }
-
-module wheel_black(radius,
-                   width,
-                   shaft_radius,
-                   shaft_flat_width,
-                   wall_width,
-                   tread_radius) {
-  color("black") {
-    difference() {
-      rim(radius, wall_width, width);
-      translate([0, 0, width / 2]) {
-        tread(radius, tread_radius); } }
-    linear_extrude(height = qr_height) {
-      difference() {
-        qr_black_flat();
-        mounting_screw_flat(); } }
-    translate([0, 0, qr_height]) {
-      motor_shaft_holder(shaft_radius,
-                         shaft_flat_width,
-                         wall_width,
-                         width - qr_height); } } }
+include <wheel-data.scad>
 
-module wheel_white() {
-  color("white") {
-    linear_extrude(height = qr_height) {
-      difference() {
-        qr_white_flat();
-        mounting_screw_flat(); } } } }
-
-module wheel(radius,
-             width,
-             shaft_radius,
-             shaft_flat_width,
-             wall_width,
-             tread_radius) {
-  wheel_black(radius,
-              width,
-              shaft_radius,
-              shaft_flat_width,
-              wall_width,
-              tread_radius);
-  wheel_white(); }
-
-module wheel_solid(radius,
-                   width,
-                   shaft_radius,
-                   shaft_flat_width,
-                   wall_width,
-                   tread_radius) {
-  difference() {
-    rim(radius, wall_width * 2, width);
-    translate([0, 0, width / 2]) {
-      tread(radius, tread_radius); } }
-  linear_extrude(height = qr_height) {
-    difference() {
-      square(qr_size, center = true);
-      mounting_screw_flat(); } }
-  translate([0, 0, qr_height]) {
-    motor_shaft_holder(shaft_radius,
-                       shaft_flat_width,
-                       wall_width,
-                       width - qr_height); } }
-
-/*
 wheel(wheel_radius,
-      wheel_width,
+      rim_width,
       motor_shaft_radius,
       motor_shaft_flat_width,
       wall_width,
       tread_radius);
-*/
 
-wheel_solid(wheel_radius,
-            wheel_width,
-            motor_shaft_radius,
-            motor_shaft_flat_width,
-            wall_width,
-            tread_radius);
+/*
+  This file is part of challenge-bot.
+
+  Challenge-bot is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  GNU Affero Emacs is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/