use special rule to build caster holder

diff --git a/3d-printables/Makefile b/3d-printables/Makefile
index baec12c22911f307b15e5e88b950d7f7edf4b41a..920650d5d31c089889ed91e1bac19f5cc812c1ab 100644 (file)
--- a/3d-printables/Makefile
+++ b/3d-printables/Makefile
@@ -12,7 +12,14 @@
        sync
        umount /media/${USER}/3D-PRINTER
 
-%-materia-101.gcode: %.stl materia-101.ini
+caster-standoff-materia-101.gcode: caster-standoff.amf materia-101-caster-standoff.ini
+       slic3r \
+       --load materia-101-caster-standoff.ini \
+       --print-center 70,50 \
+       --output $@ \
+       $<
+
+%-materia-101.gcode: %.amf materia-101.ini
        slic3r \
        --load materia-101.ini \
        --print-center 70,50 \

diff --git a/3d-printables/materia-101-caster-standoff.ini b/3d-printables/materia-101-caster-standoff.ini
new file mode 100644 (file)
index 0000000..ada31b4
--- /dev/null
+++ b/3d-printables/materia-101-caster-standoff.ini
@@ -0,0 +1,130 @@
+# generated by Slic3r 1.2.10-dev on Tue Aug 11 15:59:58 2015
+avoid_crossing_perimeters = 0
+bed_shape = 0x0,140x0,140x100,0x100
+bed_temperature = 0
+before_layer_gcode =
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 0.9
+bridge_speed = 40
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 2
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0\nM190 S0\nG1 Z100 F1000\nG1 X100 Y100 F3000\nM84
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0.35
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 20%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 0.4
+first_layer_height = 0.3
+first_layer_speed = 20
+first_layer_temperature = 230
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 1
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.6
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = %
+infill_speed = 40
+interface_shells = 0
+layer_gcode =
+layer_height = 0.1
+max_fan_speed = 100
+max_print_speed = 80
+max_volumetric_speed = 0
+min_fan_speed = 100
+min_print_speed = 15
+min_skirt_length = 25
+nozzle_diameter = 0.35
+octoprint_apikey =
+octoprint_host =
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.3
+perimeter_speed = 35
+perimeters = 4
+post_process =
+pressure_advance = 0
+raft_layers = 0
+resolution = 0.01
+retract_before_travel = 0
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 25
+seam_position = random
+skirt_distance = 4
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 10
+small_perimeter_speed = 35
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ;Home all axis\nT0\nM106 S0 ;EXTRUDER FAN ON\nG1 Z10 F1000\nG1 X100 Y100 F3000\nM104 S[first_layer_temperature] \nM109 S[first_layer_temperature]\nG92 E0
+support_material = 0
+support_material_angle = 45
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 3
+support_material_extruder = 1
+support_material_extrusion_width = 0.25
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 1
+support_material_interface_speed = 40
+support_material_pattern = rectilinear-grid
+support_material_spacing = 5
+support_material_speed = 40
+support_material_threshold = 45
+temperature = 215
+thin_walls = 1
+threads = 2
+toolchange_gcode =
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 40
+top_solid_layers = 4
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0