correct settings for slic3r 1.2.5 to build gcode

diff --git a/3d-printables/Makefile b/3d-printables/Makefile
index 34bf30b04981627f03456f823073ed0bb147dfd4..8ad41cfad42b7b0a3136f5f47fcfd8212db2f501 100644 (file)
--- a/3d-printables/Makefile
+++ b/3d-printables/Makefile
@@ -1,10 +1,10 @@
 %.stl: %.scad %-data.scad
        openscad $< -o $@
 
-%.gcode: %.stl
+%.gcode: %.stl makerfarm-i3-v-8in.ini
        slic3r \
-       -o $@ \
        --load makerfarm-i3-v-8in.ini \
+       --output $@ \
        $<
 
 %.print: %.gcode

diff --git a/3d-printables/makerfarm-i3-v-8in.ini b/3d-printables/makerfarm-i3-v-8in.ini
index 56ef152ea77619fea498705e7af8ed650f20693c..f17c2ea3742c33405fb9dd1d0e90e2de11b53bc8 100644 (file)
--- a/3d-printables/makerfarm-i3-v-8in.ini
+++ b/3d-printables/makerfarm-i3-v-8in.ini
@@ -1,12 +1,11 @@
-# generated by Slic3r 1.2.5 on Fri Feb 27 00:58:04 2015
 
-[filament:makerfarmi3v8in-filament-settings]
+# [filament:makerfarm-i3-v-8in]
 bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
-fan_always_on = 0
+fan_always_on = 1
 fan_below_layer_time = 60
 filament_diameter = 1.75
 first_layer_bed_temperature = 80
@@ -17,30 +16,12 @@ min_print_speed = 10
 slowdown_below_layer_time = 30
 temperature = 225
 
-[presets]
-filament = makerfarmi3v8in-filament-settings.ini
-print = makerfarmi3v8in-print-settings.ini
-printer = makerfarmi3v8in-printer-settings.ini
+# [presets]
+# filament = makerfarm-i3-v-8in.ini
+# print = makerfarm-i3-v-8in.ini
+# printer = makerfarm-i3-v-8in.ini
 
-[print:Simple Mode]
-bottom_solid_layers = 3
-brim_width = 0
-complete_objects = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-fill_density = 40%
-fill_pattern = 3dhoneycomb
-infill_speed = 60
-layer_height = 0.3
-perimeter_speed = 30
-perimeters = 3
-raft_layers = 0
-support_material = 0
-support_material_spacing = 2.5
-top_solid_layers = 3
-travel_speed = 130
-
-[print:makerfarmi3v8in-print-settings]
+# [print:makerfarm-i3-v-8in]
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -123,40 +104,13 @@ top_solid_layers = 3
 travel_speed = 130
 xy_size_compensation = 0
 
-[printer:makerfarmi3v8in]
-bed_shape = 0x0,200x0,200x200,0x200
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.5
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
-
-[printer:makerfarmi3v8in-printer-settings]
+# [printer:makerfarm-i3-v-8in]
 bed_shape = 0x0,200x0,200x200,0x200
 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.4
 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
@@ -177,11 +131,11 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
-[settings]
-autocenter = 1
-mode = expert
+# [settings]
+# autocenter = 1
+# mode = expert
 
-[simple]
+# [simple]
 avoid_crossing_perimeters = 1
 bed_shape = 0x0,200x0,200x200,0x200
 bed_temperature = 70
@@ -213,12 +167,12 @@ fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
 fill_angle = 45
-fill_density = 40%
+fill_density = 20%
 fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
-first_layer_bed_temperature = 75
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
-first_layer_height = 0.4
+first_layer_height = 0.35
 first_layer_speed = 30%
 first_layer_temperature = 230
 gap_fill_speed = 20