reset slic3r configs after cleaning out nozzle

* it looks like the nozzle was clogged and that was why the configs
  weren't working like they had been.

diff --git a/3d-printables/materia-101.ini b/3d-printables/materia-101.ini
index af1fe8e7e4968ba72d4f0608d8aed413a8058134..c617c803eacbc6aa9e6cc94888d3eff712651195 100644 (file)
--- a/3d-printables/materia-101.ini
+++ b/3d-printables/materia-101.ini
@@ -1,21 +1,21 @@
-# generated by Slic3r 1.2.10-dev on Mon Aug  3 08:56:06 2015
+# generated by Slic3r 1.2.10-dev on Tue Aug 11 15:59:58 2015
 avoid_crossing_perimeters = 0
 bed_shape = 0x0,140x0,140x100,0x100
 bed_temperature = 0
 before_layer_gcode =
 bottom_solid_layers = 3
 bridge_acceleration = 0
-bridge_fan_speed = 50
+bridge_fan_speed = 100
 bridge_flow_ratio = 0.9
 bridge_speed = 40
 brim_width = 0
 complete_objects = 0
-cooling = 0
+cooling = 1
 default_acceleration = 0
-disable_fan_first_layers = 1
+disable_fan_first_layers = 2
 dont_support_bridges = 1
 duplicate_distance = 6
-end_gcode = M104 S0 T0\nM190 S0\nG1 Z200 F1000\nG1 X140 Y100 F16000\nM84
+end_gcode = M104 S0\nM190 S0\nG1 Z100 F1000\nG1 X100 Y100 F3000\nM84
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 30
@@ -25,7 +25,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1,1,1
+extrusion_multiplier = 1
 extrusion_width = 0.35
 fan_always_on = 1
 fan_below_layer_time = 60
@@ -39,7 +39,7 @@ first_layer_bed_temperature = 0
 first_layer_extrusion_width = 0.4
 first_layer_height = 0.3
 first_layer_speed = 20
-first_layer_temperature = 197
+first_layer_temperature = 230
 gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 1
@@ -51,7 +51,7 @@ infill_extrusion_width = 0.6
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 100%
-infill_speed = 20
+infill_speed = 40
 interface_shells = 0
 layer_gcode =
 layer_height = 0.1
@@ -59,12 +59,12 @@ max_fan_speed = 100
 max_print_speed = 80
 max_volumetric_speed = 0
 min_fan_speed = 100
-min_print_speed = 20
+min_print_speed = 15
 min_skirt_length = 25
 nozzle_diameter = 0.35
 octoprint_apikey =
 octoprint_host =
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
@@ -84,21 +84,21 @@ retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 30
+retract_speed = 25
 seam_position = aligned
 skirt_distance = 4
 skirt_height = 1
 skirts = 2
-slowdown_below_layer_time = 30
+slowdown_below_layer_time = 10
 small_perimeter_speed = 35
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.4
-solid_infill_speed = 20
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
-start_gcode = M204 S1800\nG28 ;Home all axis\nT0\nM106 S127 ; EXTRUDER FAN ON\nG1 Z10 F1000\nG92 E0\nM117 Printing...
+start_gcode = G28 ;Home all axis\nT0\nM106 S0 ;EXTRUDER FAN ON\nG1 Z10 F1000\nG1 X100 Y100 F3000\nM104 S[first_layer_temperature] \nM109 S[first_layer_temperature]\nG92 E0
 support_material = 0
 support_material_angle = 45
 support_material_contact_distance = 0.2
@@ -113,7 +113,7 @@ support_material_pattern = rectilinear-grid
 support_material_spacing = 5
 support_material_speed = 40
 support_material_threshold = 45
-temperature = 195
+temperature = 215
 thin_walls = 1
 threads = 2
 toolchange_gcode =