--- /dev/null
+// challenge-bot
+// GNU AGPLv3 (or later at your option)
+// project available at these locations:
+// https://gitorious.org/ozzloy/challenge-bot
+// https://github.com/waynegramlich/challenge-bot
+
+// this needs to be updated with actual measurements
+length=5;
+width=5;
+thickness=1;
+
+module plate(length, width, thickness){
+ difference(){
+ cube([length, width, thickness]);
+ translate([0, 0, -0.05 * thickness])
+ scale([1, 1, 1.1])
+ translate([length / 2, (width + thickness) / 2, 0])
+ cylinder(h = thickness, r = 0.5, $fn = 20);}}
+
+
+module bracket (length, width, thickness){
+ translate ([0, thickness/2, thickness/2]){
+ translate([0, - thickness / 2, - thickness / 2])
+ plate(length, width, thickness);
+ rotate([90,0,0])
+ translate([0, - thickness / 2, - thickness / 2])
+ plate(length, width, thickness);}}
+
+bracket(length, width, thickness);
+++ /dev/null
-// challenge-bot
-// GNU AGPLv3 (or later at your option)
-// project available at these locations:
-// https://gitorious.org/ozzloy/challenge-bot
-// https://github.com/waynegramlich/challenge-bot
-
-// this needs to be updated with actual measurements
-length=5;
-width=5;
-thickness=1;
-
-module plate(length, width, thickness){
- difference(){
- cube([length, width, thickness]);
- translate([0, 0, -0.05 * thickness])
- scale([1, 1, 1.1])
- translate([length / 2, (width + thickness) / 2, 0])
- cylinder(h = thickness, r = 0.5, $fn = 20);}}
-
-
-module bracket (length, width, thickness){
- translate ([0, thickness/2, thickness/2]){
- translate([0, - thickness / 2, - thickness / 2])
- plate(length, width, thickness);
- rotate([90,0,0])
- translate([0, - thickness / 2, - thickness / 2])
- plate(length, width, thickness);}}
-
-bracket(length, width, thickness);