From: daniel watson <ozzloy@gmail.com>
Date: Sat, 9 Nov 2013 04:45:15 +0000 (-0800)
Subject: confirm sonar holder for 3/8 inch deck
X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=commitdiff_plain;h=8b34090911ea98fc28f35e5c77aaca50855e8ff1

confirm sonar holder for 3/8 inch deck
---

diff --git a/3d-printables/sonar-table-top-holder.scad b/3d-printables/sonar-table-top-holder.scad
index 55ba1c9..ef9e0f5 100644
--- a/3d-printables/sonar-table-top-holder.scad
+++ b/3d-printables/sonar-table-top-holder.scad
@@ -9,7 +9,7 @@ $fn = 60;
 // 3/16 inch in mm deck_depth = 4.7625;
 // 1/4 inch in mm = 6.35
 // subtract a little to be a squeeze fit
-deck_depth = 6.35 - 0.4;
+deck_depth = 4.7625 - 0.4;
 sonar_plate_width = 20;
 // sonar sensor measurements taken with calipers:
 //  10.82 in between, 42.33 outside, 15.82 diameter