From: daniel watson <ozzloy@gmail.com>
Date: Sun, 12 Jun 2016 00:22:28 +0000 (-0700)
Subject: add overview of tightening first screw in 2 parts
X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=commitdiff_plain;h=8eba0b8b63c28fe5f4c03b538fc01bd3cc7697f5

add overview of tightening first screw in 2 parts
---

diff --git a/curriculum/challenge-bot.scm b/curriculum/challenge-bot.scm
index 33d4753..a51f547 100644
--- a/curriculum/challenge-bot.scm
+++ b/curriculum/challenge-bot.scm
@@ -207,6 +207,13 @@
                         the screw?]))]))
     (subsubsection
      :title [fasten the arduino board to the deck]
+     (p [first we'll put the screw into the deck just enough so the deck
+               holds it in place.
+               then we will hold the arduino up to the screw and finish
+               tightening the screw down.
+               with the screw partially in, we do not have hold it as
+               rigidly while we are also holding the arduino and
+               the deck.])
      (p [push the #6-32 screw into the deck from the underside.
               the underside is the brown side.
               at the same time, spin the 6-32 screw so it rotates