From: daniel watson <ozzloy@gmail.com>
Date: Fri, 22 Nov 2013 23:04:39 +0000 (-0800)
Subject: add follow arduino sketch
X-Git-Url: http://challenge-bot.com/repos/?p=challenge-bot;a=commitdiff_plain;h=e0854435c2df3455a9df9531f92f4a4a092c24e1

add follow arduino sketch
---

diff --git a/arduino-sketches/follow/follow.ino b/arduino-sketches/follow/follow.ino
new file mode 100644
index 0000000..facaf06
--- /dev/null
+++ b/arduino-sketches/follow/follow.ino
@@ -0,0 +1,145 @@
+/*
+ This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as
+    published by the Free Software Foundation, either version 3 of the
+    License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// define which pins are connected to which components
+int right_motor_speed_pin = 3; // orange wire
+int right_motor_forward_pin = 4; // brown
+int right_motor_backward_pin = 5; // purple
+
+int right_echo_pin = 6; // white
+int right_trigger_pin = 7; // blue
+
+int left_motor_speed_pin = 8; // orange
+int left_motor_forward_pin = 9; // brown
+int left_motor_backward_pin = 10; // purple
+
+int left_echo_pin = 11; // white
+int left_trigger_pin = 12; // blue
+
+// you'll need to adjust these based on your sonar sensor's behavior
+int desired_right_ping_time = 800;
+int desired_left_ping_time = 800;
+
+void on(int pin){
+  digitalWrite(pin, HIGH);}
+
+void off(int pin){
+  digitalWrite(pin, LOW);}
+
+void set_motor(int speed_pin,
+               int forward_pin,
+               int backward_pin,
+               int speed){
+  if(speed > 0){
+    off(backward_pin);
+    on(forward_pin);}
+  else if(speed < 0){
+    off(forward_pin);
+    on(backward_pin);
+    speed = -speed;}
+  else{ // speed is 0
+    off(forward_pin);
+    off(backward_pin);}
+  // since speed has been set positive, no need to check if speed < -255.
+  if(speed > 255){
+    speed = 255;}
+  analogWrite(speed_pin, speed);}
+
+void go(int left_motor_speed, int right_motor_speed){
+  set_motor(left_motor_speed_pin,
+            left_motor_forward_pin,
+            left_motor_backward_pin,
+            left_motor_speed);
+  set_motor(right_motor_speed_pin,
+            right_motor_forward_pin,
+            right_motor_backward_pin,
+            right_motor_speed);}
+
+int ping(int trigger, int echo){
+  int ping_time = 0;
+  // turn off trigger
+  off(trigger);
+  delayMicroseconds(2);
+  // turn on the trigger and leave it on long enough for the
+  // sonar sensor to notice
+  on(trigger);
+  delayMicroseconds(10);
+  off(trigger);
+  ping_time = pulseIn(echo, HIGH);
+  if(ping_time <= 0){
+    ping_time = 3000;}
+  // sonar needs some time to recover before pinging again,
+  // so make sure it gets enough sleep right here.  50 milliseconds
+  delay(50);
+  return ping_time;}
+
+void backup(int backup_time){
+  go(-250, -250);
+  delay(backup_time);}
+
+void turn_around(int turn_around_time){
+  go(-250, 250);
+  delay(turn_around_time);}
+
+void setup(){
+  Serial.begin(9600);
+
+  pinMode(right_motor_speed_pin, OUTPUT);
+  pinMode(right_motor_forward_pin, OUTPUT);
+  pinMode(right_motor_backward_pin, OUTPUT);
+
+  pinMode(right_echo_pin, INPUT);
+  pinMode(right_trigger_pin, OUTPUT);
+
+  pinMode(left_motor_speed_pin, OUTPUT);
+  pinMode(left_motor_forward_pin, OUTPUT);
+  pinMode(left_motor_backward_pin, OUTPUT);
+
+  pinMode(left_echo_pin, INPUT);
+  pinMode(left_trigger_pin, OUTPUT);
+
+  off(left_motor_speed_pin);
+  off(left_motor_forward_pin);
+  off(left_motor_backward_pin);
+  off(left_trigger_pin);
+
+  off(right_motor_speed_pin);
+  off(right_motor_forward_pin);
+  off(right_motor_backward_pin);
+  off(right_trigger_pin);}
+
+void loop(){
+  int left_speed;
+  int right_speed;
+
+  int forward_speed = 250;
+  int stop_speed = 0;
+
+  unsigned int actual_left_ping_time = ping(left_trigger_pin, left_echo_pin);
+  unsigned int actual_right_ping_time = ping(right_trigger_pin, right_echo_pin);
+
+  left_speed = actual_left_ping_time - desired_left_ping_time;
+  right_speed = actual_right_ping_time - desired_right_ping_time;
+
+  Serial.print("left: ping = ");
+  Serial.print(actual_left_ping_time);
+  Serial.print(" speed = ");
+  Serial.print(left_speed);
+  Serial.print(" right: ping = ");
+  Serial.print(actual_right_ping_time);
+  Serial.print(" speed = ");
+  Serial.println(right_speed);
+
+  go(left_speed, right_speed);}