From 54d7ed6b0a26971eac138c2fd3c673eff2f7fa42 Mon Sep 17 00:00:00 2001
From: daniel watson <ozzloy@gmail.com>
Date: Sun, 8 Sep 2013 09:31:01 -0700
Subject: [PATCH] add ziptie holes, hull mount fixture

---
 caster-standoff.scad | 33 ++++++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/caster-standoff.scad b/caster-standoff.scad
index f61ac3a..4a1bafe 100644
--- a/caster-standoff.scad
+++ b/caster-standoff.scad
@@ -14,21 +14,44 @@ module ball_screws(){
   translate([-between/2, 0, 0]) cylinder(h = screw_length, r = screw_radius);}
 
 module fixture(){
+  // i eyeballed this too, it's (0.580/5) inches, times 2 to be stronger
+  height = 2.9464 * 2;
+  width = 20.32;  // 0.800 inches
+  between = 14.732;  //0.580 inches
+  side_radius = (width - between)/2;
+  hull(){
+    cylinder(h = height, r = between/2);
+    translate([between/2, 0, 0]) cylinder(h = height, r = side_radius);
+    translate([-between/2, 0, 0]) cylinder(h = height, r = side_radius);}}
+
+module nuts(){
+  // i eyeballed this too, it's (0.580/5) inches, times 2 to be stronger
   height = 2.9464;
-  width = 20.32;
-  between = 14.732;
+  width = 20.32;  // 0.800 inches
+  between = 14.732;  //0.580 inches
   side_radius = (width - between)/2;
   translate([between/2, 0, 0]) cylinder(h = height, r = side_radius);
-  translate([-between/2, 0, 0]) cylinder(h = height, r = side_radius);
-  }
+  translate([-between/2, 0, 0]) cylinder(h = height, r = side_radius);}
+
+module ziptie(){
+  ziptie_width = 4.7625; // 3/16 inch
+  ziptie_height = 3; // i'm guessing
+  standoff_radius = 14.732; // 0.580 inches
+  translate([-standoff_radius/2, -ziptie_width/2, 0])
+    cube([standoff_radius, ziptie_width, ziptie_height]);}
 
 module caster_standoff(){
   height = 43;
   caster_radius = 14.732/2;
+  fixture_height = 2.9464 * 2;
   difference(){
     union(){
       cylinder(h = height, r = caster_radius);
       fixture();}
-    scale([1, 1, 1.1]) translate([0, 0, -.1]) ball_screws();}}
+    translate([0, 0, -.1]) scale([1, 1, 1.1]) ball_screws();
+    translate([0, 0, fixture_height]) nuts();
+    translate([0, 0, height * 3 / 4]) scale([1.1, 1, 1]) ziptie();
+    rotate([0, 0, 90]) translate([0, 0, height * 1 / 2]) scale([1.1, 1, 1])
+      ziptie();}}
 
 caster_standoff();
-- 
2.30.2