From: daniel watson <ozzloy@gmail.com>
Date: Sun, 24 Apr 2016 19:41:12 +0000 (-0700)
Subject: lower temp because thermistor is not seated well
X-Git-Url: http://challenge-bot.com/repos/?p=ozzloy%40gmail.com%2F3d-printables;a=commitdiff_plain;h=1c2b497225434a043f56c36721810f097ef82454

lower temp because thermistor is not seated well
---

diff --git a/foot-riser-makerfarm-1.75mm.ini b/foot-riser-makerfarm-1.75mm.ini
index 0b74373..5860005 100644
--- a/foot-riser-makerfarm-1.75mm.ini
+++ b/foot-riser-makerfarm-1.75mm.ini
@@ -39,7 +39,7 @@ first_layer_bed_temperature = 90
 first_layer_extrusion_width = 200%
 first_layer_height = 0.35
 first_layer_speed = 30%
-first_layer_temperature = 255
+first_layer_temperature = 230
 gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 1