From: daniel watson <ozzloy@gmail.com>
Date: Sun, 24 Apr 2016 19:40:48 +0000 (-0700)
Subject: flatten one side so it can go against the wall
X-Git-Url: http://challenge-bot.com/repos/?p=ozzloy%40gmail.com%2F3d-printables;a=commitdiff_plain;h=a8ce078019b2955588d79003d25c6e756654287b

flatten one side so it can go against the wall
---

diff --git a/foot-riser-data.scad b/foot-riser-data.scad
index 6da59b3..c765fec 100644
--- a/foot-riser-data.scad
+++ b/foot-riser-data.scad
@@ -33,6 +33,24 @@ module foot_riser(foot_radius, extra_height) {
   linear_extrude(height = flange_height) {
     ring_2d(outer_radius, flange_radius); } }
 
+module foot_riser_against_wall(foot_radius, extra_height) {
+  foot_surround_height = 25;
+  outer_radius = foot_radius + wall_thickness;
+  flange_radius = outer_radius + foot_radius * 2;
+  flange_height = foot_radius / 2;
+  // raise the foot
+  linear_extrude(height = extra_height) {
+    circle(foot_radius); }
+  // surround the foot so it stays on riser
+  linear_extrude(height = extra_height + foot_surround_height) {
+    ring_2d(foot_radius, outer_radius); }
+  // put a flange at the bottom of the foot for stability
+  linear_extrude(height = flange_height) {
+    difference() {
+      ring_2d(outer_radius, flange_radius);
+      translate([outer_radius + flange_radius + 1, 0]) {
+        square(flange_radius * 2, center=true); } } } }
+
 /*
   This file is part of 3d-printables.