From: Maxwell Cunningham <mr.maxwell.stone@gmail.com>
Date: Mon, 7 Nov 2016 22:49:17 +0000 (-0500)
Subject: add second arm across body
X-Git-Url: http://challenge-bot.com/repos/?p=ozzloy%40gmail.com%2F3d-printables;a=commitdiff_plain;h=b1297c9e2046219466c96de81298702b9d8d30f8

add second arm across body
---

diff --git a/crazyflie-2.0-housing.scad b/crazyflie-2.0-housing.scad
index dd86617..b516e05 100644
--- a/crazyflie-2.0-housing.scad
+++ b/crazyflie-2.0-housing.scad
@@ -9,11 +9,6 @@
    wrapped around the motor shaft.
  */
 
-across_body_screws_outside_measured = 33.3;
-across_body_screws_inside_measured = 32.0;
-
-inside_ = 28.0;
-
 main_body_width_measured = 28.0;
 main_body_length_measured = 31.0;
 main_body_height_measured = 1.5;
@@ -32,6 +27,11 @@ rotate(45){
            arm_length_measured,
            arm_height_measured],
           center = true);}
+rotate(-45){
+     cube([arm_width_measured,
+           arm_length_measured,
+           arm_height_measured],
+          center = true);}
 
 /*
   This file is part of 3d-printables.