From b1297c9e2046219466c96de81298702b9d8d30f8 Mon Sep 17 00:00:00 2001 From: Maxwell Cunningham Date: Mon, 7 Nov 2016 17:49:17 -0500 Subject: [PATCH] add second arm across body --- crazyflie-2.0-housing.scad | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/crazyflie-2.0-housing.scad b/crazyflie-2.0-housing.scad index dd86617..b516e05 100644 --- a/crazyflie-2.0-housing.scad +++ b/crazyflie-2.0-housing.scad @@ -9,11 +9,6 @@ wrapped around the motor shaft. */ -across_body_screws_outside_measured = 33.3; -across_body_screws_inside_measured = 32.0; - -inside_ = 28.0; - main_body_width_measured = 28.0; main_body_length_measured = 31.0; main_body_height_measured = 1.5; @@ -32,6 +27,11 @@ rotate(45){ arm_length_measured, arm_height_measured], center = true);} +rotate(-45){ + cube([arm_width_measured, + arm_length_measured, + arm_height_measured], + center = true);} /* This file is part of 3d-printables. -- 2.30.2