import edu.wpi.first.wpilibj.command.PIDSubsystem;
public class DriveTrain extends PIDSubsystem {
- private static double kp = 0.013, ki = 0.000015, kd = -0.002;
- private static double gp = 0.018, gi = 0.000015, gd = 0;
+ // Encoder PID Proportional Constants P, I, and D
+ private static double EP = 0.013, EI = 0.000015, ED = -0.002;
+
+ // Gyro PID Constants P, I, and D
+ private static double GP = 0.018, GI = 0.000015, GD = 0;
private static double pidOutput = 0;
+
+ // PID Controller tolerances for the error
private static double encoderTolerance = 8.0, gyroTolerance = 5.0;
+
+ // Current Drive Mode Default Drive Mode is Manual
private int DRIVE_MODE = 1;
+ // Different Drive Modes
private static final int MANUAL_MODE = 1, ENCODER_MODE = 2, GYRO_MODE = 3;
private Encoder leftEncoder, rightEncoder;
-
- public static Lidar leftLidar;
- public static Lidar rightLidar;
-
private CANTalon frontLeft, frontRight, rearLeft, rearRight;
private RobotDrive robotDrive;
rearRight = new CANTalon(Constants.DriveTrain.REAR_RIGHT);
robotDrive = new RobotDrive(frontLeft, rearLeft, frontRight, rearRight);
-
- leftLidar = new Lidar(I2C.Port.kOnboard);
- rightLidar = new Lidar(I2C.Port.kOnboard); // TODO: find port for second
- // lidar
leftEncoder = new Encoder(Constants.DriveTrain.ENCODER_LEFT_A,
Constants.DriveTrain.ENCODER_LEFT_B, false, EncodingType.k4X);
rightEncoder = new Encoder(Constants.DriveTrain.ENCODER_RIGHT_A,
gyro.start();
leftGearPiston = new DoubleSolenoid(Constants.DriveTrain.LEFT_FORWARD,
- +Constants.DriveTrain.LEFT_REVERSE);
+ Constants.DriveTrain.LEFT_REVERSE);
rightGearPiston = new DoubleSolenoid(Constants.DriveTrain.RIGHT_FORWARD,
Constants.DriveTrain.RIGHT_REVERSE);
}
setDefaultCommand(new JoystickDrive());
}
+ // Print tne PID Output
public void printOutput() {
System.out.println("PIDOutput: " + pidOutput);
}
return (leftEncoder.getDistance() + rightEncoder.getDistance()) / 2;
}
+ // Whether or not the PID Controller thinks we have reached the target
+ // setpoint
public boolean reachedTarget() {
if (this.onTarget()) {
this.disable();
rightEncoder.reset();
}
- public double getLeftLidarDistance() {
- return leftLidar.pidGet();
- }
-
- public double getRightLidarDistance() {
- return rightLidar.pidGet();
- }
-
public double getRightSpeed() {
return rightEncoder.getRate(); // in inches per second
}
return leftEncoder.getDistance(); // in inches
}
+ // Get error between the setpoint of PID Controller and the current state of
+ // the robot
public double getError() {
if (DRIVE_MODE == Constants.DriveTrain.ENCODER_MODE)
return Math.abs(this.getSetpoint() - getAvgEncoderDistance());
System.out.println("Gyro Angle" + -this.getGyroAngle());
}
+ /*
+ * returns the PID output that is returned by the PID Controller
+ */
public double getOutput() {
return pidOutput;
}
+ // Updates the PID constants based on which control mode is being used
public void updatePID() {
if (DRIVE_MODE == Constants.DriveTrain.ENCODER_MODE)
this.getPIDController().setPID(kp, ki, kd);
return DRIVE_MODE;
}
+ /*
+ * Method is a required method that the PID Subsystem uses to return the
+ * calculated PID value to the driver
+ *
+ * @param Gives the user the output from the PID algorithm that is calculated
+ * internally
+ *
+ * Body: Uses the output, does some filtering and drives the robot
+ */
@Override
protected void usePIDOutput(double output) {
double left = 0;
output = Math.signum(output) * 0.3;
left = output;
right = output + drift * kp / 10;
- } else if (DRIVE_MODE == Constants.DriveTrain.GYRO_MODE) {
+ }
+ else if (DRIVE_MODE == Constants.DriveTrain.GYRO_MODE) {
left = output;
right = -output;
}
return sensorFeedback();
}
+ /*
+ * Checks the drive mode
+ *
+ * @return the current state of the robot in each state
+ * Average distance from both sides of tank drive for Encoder Mode
+ * Angle from the gyro in GYRO_MODE
+ */
private double sensorFeedback() {
if (DRIVE_MODE == Constants.DriveTrain.ENCODER_MODE)
return getAvgEncoderDistance();
return 0;
}
+ /*
+ * @param left and right setpoints to set to the left and right side of tank
+ * inverted is for Logan, wants the robot to invert all controls left = right
+ * and right = left
+ * negative input is required for the regular rotation because RobotDrive
+ * tankdrive method drives inverted
+ */
public void drive(double left, double right) {
robotDrive.tankDrive(-left, -right);
// dunno why but inverted drive (- values is forward)
}
+ /*
+ * constrains the distance to within -100 and 100 since we aren't going to
+ * drive more than 100 inches
+ *
+ * Configure Encoder PID
+ *
+ * Sets the setpoint to the PID subsystem
+ */
public void driveDistance(double dist, double maxTimeOut) {
dist = MathLib.constrain(dist, -100, 100);
setEncoderPID();
setSetpoint(dist);
}
+ /*
+ * Sets the encoder mode
+ * Updates the PID constants sets the tolerance and sets output/input ranges
+ * Enables the PID controllers
+ */
public void setEncoderPID() {
DRIVE_MODE = Constants.DriveTrain.ENCODER_MODE;
this.updatePID();
this.enable();
}
+ /*
+ * Sets the Gyro Mode
+ * Updates the PID constants, sets the tolerance and sets output/input ranges
+ * Enables the PID controllers
+ */
private void setGyroPID() {
DRIVE_MODE = Constants.DriveTrain.GYRO_MODE;
this.updatePID();
this.enable();
}
+ /*
+ * Turning method that should be used repeatedly in a command
+ *
+ * First constrains the angle to within -360 and 360 since that is as much as
+ * we need to turn
+ *
+ * Configures Gyro PID and sets the setpoint as an angle
+ */
public void turnAngle(double angle) {
angle = MathLib.constrain(angle, -360, 360);
setGyroPID();
rearRight.set(right);
}
+ /*
+ * @return a value that is the current setpoint for the piston
+ * kReverse or kForward
+ */
public Value getLeftGearPistonValue() {
return leftGearPiston.get();
}
+ /*
+ * @return a value that is the current setpoint for the piston
+ * kReverse or kForward
+ */
public Value getRightGearPistonValue() {
return rightGearPiston.get();
}
+ /*
+ * Changes the ball shift gear assembly to high
+ */
public void setHighGear() {
changeGear(Constants.DriveTrain.HIGH_GEAR);
}
+ /*
+ * Changes the ball shift gear assembly to low
+ */
public void setLowGear() {
changeGear(Constants.DriveTrain.LOW_GEAR);
}
+ /*
+ * changes the gear to a DoubleSolenoid.Value
+ */
public void changeGear(DoubleSolenoid.Value gear) {
leftGearPiston.set(gear);
rightGearPiston.set(gear);