1 /* GNU AGPLv3 (or later at your option)
2 see bottom for more license info */
4 /* protective housing for crazyflie 2.0.
6 reinforce the arms so they do not snap.
8 keep the props up high so they do not get hairs from the ground
9 wrapped around the motor shaft.
12 main_body_width_measured
= 28.0;
13 main_body_length_measured
= 31.0;
14 main_body_height_measured
= 1.5;
16 arm_width_measured
= 3.6;
17 arm_length_measured
= 79.0;
18 arm_height_measured
= main_body_height_measured
;
20 cube([main_body_width_measured
,
21 main_body_length_measured
,
22 main_body_height_measured
],
25 cube([arm_width_measured
,
30 cube([arm_width_measured
,
36 This file is part of 3d-printables.
38 3d-printables is free software: you can redistribute it and/or modify
39 it under the terms of the GNU Affero General Public License as published by
40 the Free Software Foundation, either version 3 of the License, or
41 (at your option) any later version.
43 3d-printables is distributed in the hope that it will be useful,
44 but WITHOUT ANY WARRANTY; without even the implied warranty of
45 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
46 GNU Affero General Public License for more details.
48 You should have received a copy of the GNU Affero General Public License
49 along with challenge-bot. If not, see <http://www.gnu.org/licenses/>.