Commit | Line | Data |
---|---|---|
df8e764d | 1 | /* GNU AGPLv3 (or later at your option) |
2 | see bottom for more license info */ | |
3 | ||
4 | /* protective housing for crazyflie 2.0. | |
5 | ||
6 | reinforce the arms so they do not snap. | |
7 | ||
8 | keep the props up high so they do not get hairs from the ground | |
9 | wrapped around the motor shaft. | |
10 | */ | |
11 | ||
df8e764d | 12 | main_body_width_measured = 28.0; |
13 | main_body_length_measured = 31.0; | |
df8e764d | 14 | main_body_height_measured = 1.5; |
15 | ||
e9c572e7 | 16 | arm_width_measured = 3.6; |
17 | arm_length_measured = 79.0; | |
18 | arm_height_measured = main_body_height_measured; | |
df8e764d | 19 | |
20 | cube([main_body_width_measured, | |
21 | main_body_length_measured, | |
6123c3ad | 22 | main_body_height_measured], |
23 | center = true); | |
9e3e6b08 | 24 | rotate(45){ |
25 | cube([arm_width_measured, | |
26 | arm_length_measured, | |
27 | arm_height_measured], | |
28 | center = true);} | |
b1297c9e MC |
29 | rotate(-45){ |
30 | cube([arm_width_measured, | |
31 | arm_length_measured, | |
32 | arm_height_measured], | |
33 | center = true);} | |
df8e764d | 34 | |
35 | /* | |
36 | This file is part of 3d-printables. | |
37 | ||
38 | 3d-printables is free software: you can redistribute it and/or modify | |
39 | it under the terms of the GNU Affero General Public License as published by | |
40 | the Free Software Foundation, either version 3 of the License, or | |
41 | (at your option) any later version. | |
42 | ||
43 | 3d-printables is distributed in the hope that it will be useful, | |
44 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
45 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
46 | GNU Affero General Public License for more details. | |
47 | ||
48 | You should have received a copy of the GNU Affero General Public License | |
49 | along with challenge-bot. If not, see <http://www.gnu.org/licenses/>. | |
50 | */ |