:title [required materials]
(p [you will need the things in this picture.
,(figure :legend "arduino to deck / required materials"
- (image :file "arduino-to-deck/0-required-materials.png"))
+ (image :file "arduino-to-deck/0-required-materials.png"))
,(itemize
(item [medical kit with bandages])
(item [safety goggles])
(p [the arduino should be placed as shown in this picture.]
(figure :legend "arduino to deck / place arduino"
(image :file "arduino-to-deck/3-place-arduino.png"))
- [the top edge of the arduino should line up with the underside
- of the holes closest to the edge of the deck.
- on the arduino, there's a hole on the top left.
- that hole should be mid-way between two of the holes in the
- grid of holes on the deck.
- put the arduino hole between the third and fourth holes
- from the left side of the deck.]))
+ [here's a closeup]
+ (figure :legend "arduino to deck / place arduino closeup"
+ (image :file
+ "arduino-to-deck/4-place-arduino-closeup.png"))
+ [the picture above shows where to place the arduino on the deck.
+ the arduino should line up with the holes on the deck.
+ this alignment line is highlighted in pink.
+ on the arduino, there's a hole on the top left, between the
+ orange reset button and black headers.
+ the green circle shows where the hole is.
+ the blue box encloses the arduino hole and two deck holes.
+ place the arduino hole mid-way between the two
+ deck holes.]))
(subsubsection
:title [drilling]))
(subsection