</H2>
<P>
The schematic is available as either a
- <A HRef="busduino.pdf">
+ <A HRef="mbino.pdf">
.pdf</A> file or as a
- <A HRef="busduino.svg">
+ <A HRef="mbino.svg">
.svg</A> (Scalable Vector Graphics) file.
The .pdf file should print reasonably well on a black
and white printer. The .svg file is embedded below:
</P>
- <Img Src="busduino.svg">
+ <Img Src="mbino.svg">
<P>
There are two 2.1mm power jacks , N1 and N3.
N1 feeds power through protection diode D1 and
2.0 Design Files</A>
</H2>
<P>
-This board was designed using KiCAD. A complete KiCAD
-archive of board is found in
- <A HRef="busduino.zip">
-busduino.zip</A>. ("BusDuino" was the original name
-of the board before it was renamed to "MBino".)
-When this file is unzipped, the KiCad project file
-can be found down in
-<Code>robus/busdino/rev_b/busdino.pro</Code>. Various
-shared <Code>.mod</Code> and <Code>.lib</Code> files
-are kept in the <Code>robus</Code> directory. All
-Gerber and drill files are generated using KiCad.
+This board was designed using KiCAD. The design
+files are kept at
+ <A HRef="http://github.com/waynegramlich/mbino">
+http://github.com/waynegramlich/mbino</A>.
</P>
<H2>
<A Name="Errata_and_Notes">
<P>
The following errors and issues are noted:
<UL><LI>
- U1 Vin/Vout pins are swapped
- </LI><LI>
- A reset circuit from MakerBus is needed.
+ A reset circuit for MakerBus is needed.
</LI></UL>
</P><P>
The design notes for the reset circuit are: