(item [why should we clean off the tip of the soldering iron?])
(item [why do we put more solder back on the tip of the iron?]))))
(subsection
- :title [deck attachment]))
+ :title [deck attachment]
+ (subsubsection
+ :title [motor battery pack attachment]
+ (p [attach the motor battery pack to the robot deck.])
+ (figure
+ :legend "batteries / placement / motor pack"
+ (video
+ :file "2-batteries/1-placement/0-motor-battery-pack.ogv"))
+ (p [we will use glue dots to attach the motor battery pack to the
+ deck.
+ the pack could be placed anywhere, but we will place it
+ in the lower left side of the robot.
+ this battery pack has 4 AA batteries in it.
+ each battery has 1.5 volts difference between the positive
+ and negative side.
+ the batteries are connected in series.
+ the total voltage difference for the whole battery pack is
+ the sum of the individual voltages, which is 6 volts.])
+ (enumerate
+ (item [make sure you are placing dots on the side of the battery
+ pack without the on/off switch.])
+ (item [peel off a glue dot for each of the corners of the
+ battery pack.])
+ (item [when placing the battery pack, make sure the screw hole
+ aligns with a hole on the deck.]))
+ (p [check])
+ (enumerate
+ (item [why place the glue dots on the side of the battery pack
+ without the on/off switch?])))))
(section
:title [motors]
(subsection