private RobotDrive robotDrive;
private GyroLib gyro;
- private DoubleSolenoid leftGearPiston, rightGearPiston;
+ public DoubleSolenoid leftGearPiston, rightGearPiston;
// Drivetrain specific constants that relate to the inches per pulse value for
// the encoders
/*
* Method is a required method that the PID Subsystem uses to return the
* calculated PID value to the driver
- *
+ *
* @param Gives the user the output from the PID algorithm that is calculated
* internally
- *
+ *
* Body: Uses the output, does some filtering and drives the robot
*/
@Override
/*
* Checks the drive mode
- *
+ *
* @return the current state of the robot in each state Average distance from
* both sides of tank drive for Encoder Mode Angle from the gyro in GYRO_MODE
*/
/*
* constrains the distance to within -100 and 100 since we aren't going to
* drive more than 100 inches
- *
+ *
* Configure Encoder PID
- *
+ *
* Sets the setpoint to the PID subsystem
*/
public void driveDistance(double dist, double maxTimeOut) {
/*
* Turning method that should be used repeatedly in a command
- *
+ *
* First constrains the angle to within -360 and 360 since that is as much as
* we need to turn
- *
+ *
* Configures Gyro PID and sets the setpoint as an angle
*/
public void turnAngle(double angle) {