package org.usfirst.frc.team3501.robot.subsystems;
import org.usfirst.frc.team3501.robot.Constants;
-import org.usfirst.frc.team3501.robot.GyroLib;
import org.usfirst.frc.team3501.robot.MathLib;
import org.usfirst.frc.team3501.robot.commands.driving.JoystickDrive;
+import org.usfirst.frc.team3501.robot.sensors.GyroLib;
+import org.usfirst.frc.team3501.robot.sensors.Lidar;
import edu.wpi.first.wpilibj.CANTalon;
import edu.wpi.first.wpilibj.CounterBase.EncodingType;
import edu.wpi.first.wpilibj.command.PIDSubsystem;
public class DriveTrain extends PIDSubsystem {
- // Encoder PID Proportional Constants P, I, and D
- private static double EP = 0.013, EI = 0.000015, ED = -0.002;
-
- // Gyro PID Constants P, I, and D
- private static double GP = 0.018, GI = 0.000015, GD = 0;
- private static double pidOutput = 0;
-
- // PID Controller tolerances for the error
- private static double encoderTolerance = 8.0, gyroTolerance = 5.0;
-
// Current Drive Mode Default Drive Mode is Manual
private int DRIVE_MODE = 1;
-
- // Different Drive Modes
- private static final int MANUAL_MODE = 1, ENCODER_MODE = 2, GYRO_MODE = 3;
+ private static double pidOutput = 0;
private Encoder leftEncoder, rightEncoder;
+
+ public static Lidar lidar;
+
private CANTalon frontLeft, frontRight, rearLeft, rearRight;
private RobotDrive robotDrive;
private GyroLib gyro;
private DoubleSolenoid leftGearPiston, rightGearPiston;
+ // Drivetrain specific constants that relate to the inches per pulse value for
+ // the encoders
+
public DriveTrain() {
- super(EP, EI, ED);
+ super(Constants.DriveTrain.kp, Constants.DriveTrain.ki,
+ Constants.DriveTrain.kd);
frontLeft = new CANTalon(Constants.DriveTrain.FRONT_LEFT);
frontRight = new CANTalon(Constants.DriveTrain.FRONT_RIGHT);
rearRight = new CANTalon(Constants.DriveTrain.REAR_RIGHT);
robotDrive = new RobotDrive(frontLeft, rearLeft, frontRight, rearRight);
+
+ lidar = new Lidar(I2C.Port.kOnboard);
+
leftEncoder = new Encoder(Constants.DriveTrain.ENCODER_LEFT_A,
Constants.DriveTrain.ENCODER_LEFT_B, false, EncodingType.k4X);
rightEncoder = new Encoder(Constants.DriveTrain.ENCODER_RIGHT_A,
rightEncoder.reset();
}
+ public double getLidarDistance() {
+ return lidar.pidGet();
+ }
+
public double getRightSpeed() {
return rightEncoder.getRate(); // in inches per second
}
// Updates the PID constants based on which control mode is being used
public void updatePID() {
if (DRIVE_MODE == Constants.DriveTrain.ENCODER_MODE)
- this.getPIDController().setPID(EP, EI, ED);
+ this.getPIDController().setPID(Constants.DriveTrain.kp,
+ Constants.DriveTrain.ki, Constants.DriveTrain.kd);
else
- this.getPIDController().setPID(GP, GD, GI);
+ this.getPIDController().setPID(Constants.DriveTrain.gp,
+ Constants.DriveTrain.gd, Constants.DriveTrain.gi);
}
public CANTalon getFrontLeft() {
/*
* Method is a required method that the PID Subsystem uses to return the
* calculated PID value to the driver
- *
+ *
* @param Gives the user the output from the PID algorithm that is calculated
* internally
- *
+ *
* Body: Uses the output, does some filtering and drives the robot
*/
@Override
if (Math.abs(output) > 0 && Math.abs(output) < 0.3)
output = Math.signum(output) * 0.3;
left = output;
- right = output + drift * EP / 10;
- }
- else if (DRIVE_MODE == Constants.DriveTrain.GYRO_MODE) {
+ right = output + drift * Constants.DriveTrain.kp / 10;
+ } else if (DRIVE_MODE == Constants.DriveTrain.GYRO_MODE) {
left = output;
right = -output;
}
}
/*
- * Checks the drive mode
- *
- * @return the current state of the robot in each state
- * Average distance from both sides of tank drive for Encoder Mode
- * Angle from the gyro in GYRO_MODE
+ * Checks the drive mode <<<<<<< 9728080f491e9fb09795494349dba1297f447c0f
+ *
+ * @return the current state of the robot in each state Average distance from
+ * both sides of tank drive for Encoder Mode Angle from the gyro in GYRO_MODE
+ * =======
+ *
+ * @return the current state of the robot in each state Average distance from
+ * both sides of tank drive for Encoder Mode Angle from the gyro in GYRO_MODE
+ * >>>>>>> Move all constants in DeadReckoning to Auton class because it makes
+ * more sense
*/
private double sensorFeedback() {
if (DRIVE_MODE == Constants.DriveTrain.ENCODER_MODE)
/*
* @param left and right setpoints to set to the left and right side of tank
* inverted is for Logan, wants the robot to invert all controls left = right
- * and right = left
- * negative input is required for the regular rotation because RobotDrive
- * tankdrive method drives inverted
+ * and right = left negative input is required for the regular rotation
+ * because RobotDrive tankdrive method drives inverted
*/
public void drive(double left, double right) {
+ robotDrive.tankDrive(-left, -right);
// dunno why but inverted drive (- values is forward)
if (!Constants.DriveTrain.inverted)
- robotDrive.tankDrive(-left,
- -right);
+ robotDrive.tankDrive(-left, -right);
else
robotDrive.tankDrive(right, left);
}
}
/*
- * Sets the encoder mode
- * Updates the PID constants sets the tolerance and sets output/input ranges
- * Enables the PID controllers
+ * Sets the encoder mode Updates the PID constants sets the tolerance and sets
+ * output/input ranges Enables the PID controllers
*/
public void setEncoderPID() {
DRIVE_MODE = Constants.DriveTrain.ENCODER_MODE;
this.updatePID();
- this.setAbsoluteTolerance(encoderTolerance);
+ this.setAbsoluteTolerance(Constants.DriveTrain.encoderTolerance);
this.setOutputRange(-1.0, 1.0);
this.setInputRange(-200.0, 200.0);
this.enable();
}
/*
- * Sets the Gyro Mode
- * Updates the PID constants, sets the tolerance and sets output/input ranges
- * Enables the PID controllers
+ * Sets the Gyro Mode Updates the PID constants, sets the tolerance and sets
+ * output/input ranges Enables the PID controllers
*/
private void setGyroPID() {
DRIVE_MODE = Constants.DriveTrain.GYRO_MODE;
this.updatePID();
- this.getPIDController().setPID(GP, GI, GD);
+ this.getPIDController().setPID(Constants.DriveTrain.gp,
+ Constants.DriveTrain.gi, Constants.DriveTrain.gd);
- this.setAbsoluteTolerance(gyroTolerance);
+ this.setAbsoluteTolerance(Constants.DriveTrain.gyroTolerance);
this.setOutputRange(-1.0, 1.0);
this.setInputRange(-360.0, 360.0);
this.enable();
/*
* Turning method that should be used repeatedly in a command
- *
+ *
* First constrains the angle to within -360 and 360 since that is as much as
* we need to turn
- *
+ *
* Configures Gyro PID and sets the setpoint as an angle
*/
public void turnAngle(double angle) {
}
/*
- * @return a value that is the current setpoint for the piston
- * kReverse or kForward
+ * @return a value that is the current setpoint for the piston kReverse or
+ * kForward
*/
public Value getLeftGearPistonValue() {
return leftGearPiston.get();
}
/*
- * @return a value that is the current setpoint for the piston
- * kReverse or kForward
+ * @return a value that is the current setpoint for the piston kReverse or
+ * kForward
*/
public Value getRightGearPistonValue() {
return rightGearPiston.get();
leftGearPiston.set(gear);
rightGearPiston.set(gear);
}
+
+ public void toggleTimeDeadReckoning() {
+ Constants.Auton.isUsingTime = !Constants.Auton.isUsingTime;
+ }
}
projects / 3501 / stronghold-2016 / blobdiff