use openscad open source hardware logo

[challenge-bot] / 3d-printables / open-source-hardware-logo-data.scad

/*
  challenge-bot
  project available here:
  https://challenge-bot.com/

  Copyright (C) 2016 Daniel Watson
  See the end of the file for license conditions.
  tl;dr GNU AGPLv3 (or later at your option)
 */

/*
  open source hardware logo data
  this file contains all the data, and nothing else
  see open-source-hardware-logo.scad for example use
 */

// keep around 20 for editing, 100 for final output
$fn = 100;

open_source_hardware_logo_radius = 10;
open_source_hardware_logo_depth = 5;

module octogon_slice_upper_half(radius) {
  polygon([[0, 0],
           [radius, tan(360 / (8 * 2)) * radius],
           [radius, 0]]); }

module open_source_hardware_spoke_upper_half(radius) {
  difference(){
    octogon_slice_upper_half(radius);
    circle(radius / 4);
    translate([radius * 3 / 4,
               (5 / 12) * tan(360 / (8 * 2)) * radius]) {
      rotate(-360 / 32) {
        square(radius); }
      rotate(360 / 16) {
        square(radius); } } } }

module open_source_hardware_spoke(radius) {
  open_source_hardware_spoke_upper_half(radius);
  mirror([0, 1, 0]) {
    open_source_hardware_spoke_upper_half(radius); } }

module open_source_hardware_logo_2d(radius) {
  for(spoke_number = [-1 : 5]){
    rotate(spoke_number * (360 / 8)) {
      open_source_hardware_spoke(radius); } } }

module open_source_hardware_logo(radius, depth) {
  linear_extrude(height = depth) {
     open_source_hardware_logo_2d(radius); } }

/*
  This file is part of challenge-bot.

  Challenge-bot is free software: you can redistribute it and/or modify
  it under the terms of the GNU Affero General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  GNU Affero Emacs is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU Affero General Public License for more details.

  You should have received a copy of the GNU Affero General Public License
  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
*/