8464810c |
1 | // challenge-bot |
2 | // GNU AGPLv3 (or later at your option) |
3 | // project available at these locations: |
4 | // https://gitorious.org/ozzloy/challenge-bot |
5 | // https://github.com/waynegramlich/challenge-bot |
6 | |
7 | use <wheel.scad> |
8 | |
9 | qr_size = 54; |
10 | qr_height = 2; |
11 | |
12 | wall_width = 3; |
13 | |
14 | wheel_width = 6; |
15 | wheel_radius = sqrt(2 * pow(qr_size / 2, 2)) + wall_width / 2; |
16 | |
17 | motor_shaft_radius = 3.7; |
18 | motor_shaft_flat_width = 4.8; |
19 | |
00f879c4 |
20 | translate([-30.4, -1.6, 0]){ |
21 | rim(wheel_radius + 5, 5, 0.4); |
22 | rim(wheel_radius + 3, 0.4, qr_height + 1); |
23 | |
8464810c |
24 | wheel_black(wheel_radius, |
25 | wheel_width, |
26 | motor_shaft_radius, |
27 | motor_shaft_flat_width, |
28 | wall_width);} |