| a77b88c5 |
1 | ### Phase 1: Arduino + Blinky LED's: |
| 2 | |
| 3 | Goals: |
| 4 | |
| 5 | * Cut peg board to size using hack saw |
| 6 | * Get Arduino IDE installed on laptop. |
| 7 | * Drill Arduino mounting holes in peg board |
| 8 | * Mount Arduino to peg board using screws |
| 9 | * Mount Mini Breadboard to peg board |
| 10 | * Install LED + resistor on breadboard |
| 11 | * Hook up LED to Arduino |
| 12 | * Download Blinky LED program |
| 13 | |
| 14 | Bill of Materials: |
| 15 | |
| 16 | * 1 Arduino(tm) board + USB Cable (SainSmart: 20-011-110: ~$14/10) |
| 17 | * 1 Mini BreadBoard (Ebay: ~$3/10) |
| 18 | * 1 Breadboard cables (Ebay: ~$4/10) |
| 19 | * 1 4in x 5in peg board to mount arduino + miniboard |
| 20 | * 4 small squares of double sided tape |
| 21 | * 3 #4-40 Phillips 1/2" flat-head screws |
| 22 | * 6 #4-40 hex nuts |
| 23 | * 3 #4 lock washers |
| 24 | * 2 Red LED's |
| 25 | * 2 Yellow LED's |
| 26 | * 2 Green LED's |
| 27 | * 6 330 Ohm Resistors |
| 28 | |
| 29 | Required Tools: |
| 30 | |
| 31 | * 1 Safety glasses!!! |
| 32 | * 1 Laptop Windows or MacOS or Linux |
| 33 | * 1 Hack saw (to cut peg board) |
| 34 | * 1 Phillips screw driver |
| 35 | * 1 Drill + Drill Bits |
| 36 | * 1 Pliers |
projects / challenge-bot / blame