separate data into *-data.scad for 3d models

[challenge-bot] / 3d-printables / angle-bracket-data.scad

diff --git a/3d-printables/angle-bracket-data.scad b/3d-printables/angle-bracket-data.scad
new file mode 100644 (file)
index 0000000..bd69d59
--- /dev/null
+++ b/3d-printables/angle-bracket-data.scad
@@ -0,0 +1,27 @@
+// challenge-bot
+// GNU AGPLv3 (or later at your option)
+// project available at these locations:
+// https://gitorious.org/ozzloy/challenge-bot
+// https://github.com/waynegramlich/challenge-bot
+
+// this needs to be updated with actual measurements
+length = 5;
+width = 5;
+thickness = 1;
+
+module plate(length, width, thickness) {
+  difference() {
+    cube([length, width, thickness]);
+    translate([0, 0, -0.05 * thickness]) {
+      scale([1, 1, 1.1]) {
+        translate([length / 2, (width + thickness) / 2, 0]) {
+          cylinder(h = thickness, r = 0.5, $fn = 20); } } } } }
+
+
+module bracket(length, width, thickness) {
+  translate([0, thickness / 2, thickness / 2]) {
+    translate([0, - thickness / 2, - thickness / 2]) {
+      plate(length, width, thickness); }
+    rotate([90, 0, 0]) {
+      translate([0, - thickness / 2, - thickness / 2]) {
+        plate(length, width, thickness); } } } }