use spokes instead of square for wheel

[challenge-bot] / 3d-printables / angle-bracket.scad

diff --git a/3d-printables/angle-bracket.scad b/3d-printables/angle-bracket.scad
index fdd2b50eb095d0e7c4663c94daf34453d1d4e0c9..cdbd4b7ffa57ee8130dc8d1c60608244ecd45013 100644 (file)
--- a/3d-printables/angle-bracket.scad
+++ b/3d-printables/angle-bracket.scad
@@ -1,29 +1,29 @@
+/*
+  Copyright (C) 2015 Daniel Watson
+  See the end of the file for license conditions.
+*/
 // challenge-bot
 // GNU AGPLv3 (or later at your option)
-// project available at these locations:
-// https://gitorious.org/ozzloy/challenge-bot
-// https://github.com/waynegramlich/challenge-bot
+// project available here:
+// https://challenge-bot.com/
 
-// this needs to be updated with actual measurements
-length=5;
-width=5;
-thickness=1;
+include <angle-bracket-data.scad>
 
-module plate(length, width, thickness){
-  difference(){
-    cube([length, width, thickness]);
-    translate([0, 0, -0.05 * thickness])
-      scale([1, 1, 1.1])
-        translate([length / 2, (width + thickness) / 2, 0])
-          cylinder(h = thickness, r = 0.5, $fn = 20);}}
+bracket(length, width, thickness);
 
+/*
+  This file is part of challenge-bot.
 
-module bracket (length, width, thickness){
-  translate ([0, thickness/2, thickness/2]){
-    translate([0, - thickness / 2, - thickness / 2])
-      plate(length, width, thickness);
-    rotate([90,0,0])
-      translate([0, - thickness / 2, - thickness / 2])
-        plate(length, width, thickness);}}
+  Challenge-bot is free software: you can redistribute it and/or modify
+  it under the terms of the GNU Affero General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
 
-bracket(length, width, thickness);
+  GNU Affero Emacs is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU Affero General Public License for more details.
+
+  You should have received a copy of the GNU Affero General Public License
+  along with challenge-bot.  If not, see <http://www.gnu.org/licenses/>.
+*/