remove hole no longer present in oshw logo flange

[challenge-bot] / 3d-printables / caster-standoff.scad

diff --git a/3d-printables/caster-standoff.scad b/3d-printables/caster-standoff.scad
index aff2eb5e5320d219a629c83c761a2f7305c1f6f4..51481570318c6b753baa62c613133335f4aa7ccb 100644 (file)
--- a/3d-printables/caster-standoff.scad
+++ b/3d-printables/caster-standoff.scad
@@ -4,6 +4,8 @@
 // https://gitorious.org/ozzloy/challenge-bot
 // https://github.com/waynegramlich/challenge-bot
 
+use <oshw.scad>
+
 // use 10 ish for development, 60 or so for printing
 $fn = 60;
 
@@ -11,16 +13,19 @@ $fn = 60;
 ball_diameter = 12.7 + 0.80; // extra bit added for printing imprecision
 ball_radius = ball_diameter / 2;
 
+standoff_height = 60; // kyle eyeballed
+
 wall_thickness = 1;
 holder_floor = 3;
-holder_arms_length = 10;
-holder_height = holder_floor + holder_arms_length + (25 / 32) * ball_diameter;
+holder_arms_length = 20;
+holder_height =
+  holder_floor + holder_arms_length + (11 / 16) * ball_diameter;
 
 holder_radius = ball_radius + wall_thickness;
 holder_diameter = holder_radius * 2;
 
 standoff_radius = holder_radius; // 0.580 / 2 inches from spec sheet
-standoff_height = 48; // eyeballed
+standoff_lower_portion_height = standoff_height - holder_height;
 
 // eyeballed caster flange height, (0.580/5) inches, times 2 to be stronger
 caster_flange_height = 5;
@@ -35,14 +40,16 @@ deck_flange_radius = (deck_grid_width) / 2 + deck_flange_screw_radius + 3;
 
 module deck_flange(){
   difference(){
-    cylinder(h = deck_flange_height, r = deck_flange_radius);
+    scale([0.265, 0.265, 1]){
+      linear_extrude(height = deck_flange_height){
+        oshw();}}
     for(ii = [-1, 1]){
       translate([deck_grid_width / 2 * ii, 0, -.1])
         cylinder(h = deck_flange_height * 1.1,
-                 r = deck_flange_screw_radius);
-      translate([0, deck_grid_width / 2 * ii, -.1])
-        cylinder(h = deck_flange_height * 1.1,
-        r = deck_flange_screw_radius);}}}
+                 r = deck_flange_screw_radius);}
+    translate([0, deck_grid_width / 2, -.1])
+      cylinder(h = deck_flange_height * 1.1,
+               r = deck_flange_screw_radius);}}
 
 module deck_flange_reinforcement(){
   translate([-deck_flange_radius,
@@ -67,14 +74,13 @@ module ball_holder(){
            center = true);}}}
 
 module caster_standoff(){
-  cylinder(h = standoff_height,
+  cylinder(h = standoff_lower_portion_height,
            r = standoff_radius);
   deck_flange();
   for(ii = [0:3]){
     rotate([0, 0, 45 + 90 * ii])
       deck_flange_reinforcement();}
-  translate([0, 0, standoff_height]){
+  translate([0, 0, standoff_lower_portion_height]){
     ball_holder();}}
 
-//caster_standoff();
-ball_holder();
+caster_standoff();