use openscad open source hardware logo

[challenge-bot] / 3d-printables / deck-holder-data.scad

diff --git a/3d-printables/deck-holder-data.scad b/3d-printables/deck-holder-data.scad
index a032658a72af0d078939e5ba64660cc04826f0f1..3a28dc4edc1333fe2df237c77d182af46089d383 100644 (file)
--- a/3d-printables/deck-holder-data.scad
+++ b/3d-printables/deck-holder-data.scad
@@ -17,7 +17,7 @@
 
 $fn = 60;
 
-include <oshw-data.scad>
+include <open-source-hardware-logo-data.scad>
 
 // 3/16 inch in mm deck_depth = 4.7625;
 // 1/4 inch in mm = 6.35
@@ -58,20 +58,20 @@ module deck_holder() {
       translate([deck_holder_height, sonar_holder_depth - 0.3]) {
         square([deck_holder_length - (deck_holder_height),
                 deck_depth + 0.6]); } } }
-  translate([deck_holder_length - oshw_dy * 0.05, 0, deck_holder_width / 2])
-  scale([0.1, 1, 0.1])
-  rotate(v = [1, 0, 0], a = 90)
-  rotate(90)
-  linear_extrude(height = 0.5)
-  oshw();
-  translate([deck_holder_length - oshw_dy * 0.05,
-             deck_holder_height + 0.5,
-             deck_holder_width / 2])
-  rotate(v = [1, 0, 0], a = 90)
-  rotate(90)
-  scale([0.1, 0.1, 1])
-  linear_extrude(height = 0.5)
-  oshw(); }
+  translate([deck_holder_length - deck_holder_width / 2,
+             0,
+             deck_holder_width / 2]) {
+    rotate(v = [1, 0, 0], a = 90) {
+      rotate(90) {
+        open_source_hardware_logo(deck_holder_width / 2,
+                                  oshw_height); } } }
+  translate([deck_holder_length - deck_holder_width / 2,
+             deck_holder_height + oshw_height,
+             deck_holder_width / 2]) {
+    rotate(v = [1, 0, 0], a = 90) {
+      rotate(90) {
+        open_source_hardware_logo(deck_holder_width / 2,
+                                  oshw_height); } } } }
 
 /*
   This file is part of challenge-bot.