modify caster to attempt to print better

[challenge-bot] / 3d-printables / materia-101.ini

diff --git a/3d-printables/materia-101.ini b/3d-printables/materia-101.ini
index 269296327a4f7e5245d67d25d49097976c82cad6..f4db62e859047353e4554fb294c05fcb8463026b 100644 (file)
--- a/3d-printables/materia-101.ini
+++ b/3d-printables/materia-101.ini
@@ -25,7 +25,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1.05,1,1
+extrusion_multiplier = 1
 extrusion_width = 0
 fan_always_on = 1
 fan_below_layer_time = 60
@@ -38,7 +38,7 @@ first_layer_acceleration = 0
 first_layer_bed_temperature = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 8
 first_layer_temperature = 220
 gap_fill_speed = 40
 gcode_arcs = 0
@@ -51,7 +51,7 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 100%
-infill_speed = 70
+infill_speed = 17
 interface_shells = 0
 layer_gcode =
 layer_height = 0.15
@@ -59,7 +59,7 @@ max_fan_speed = 100
 max_print_speed = 80
 max_volumetric_speed = 0
 min_fan_speed = 100
-min_print_speed = 20
+min_print_speed = 7
 min_skirt_length = 0
 notes = Profile for low quallity print with 20% infill and 0.15 mm z step\n\nMateria 101
 nozzle_diameter = 0.35
@@ -114,12 +114,12 @@ support_material_pattern = rectilinear-grid
 support_material_spacing = 3
 support_material_speed = 50
 support_material_threshold = 45
-temperature = 197
+temperature = 200
 thin_walls = 1
 threads = 2
 toolchange_gcode =
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 40
+top_solid_infill_speed = 10
 top_solid_layers = 4
 travel_speed = 120
 use_firmware_retraction = 0