remove unused qr code from wheel

[challenge-bot] / 3d-printables / wheel.scad

diff --git a/3d-printables/wheel.scad b/3d-printables/wheel.scad
index 1d1994e45b66b7a112d62e7324c46101c86d7026..656ae160816e5e8b302681ae6c287e035973b5bc 100644 (file)
--- a/3d-printables/wheel.scad
+++ b/3d-printables/wheel.scad
@@ -9,130 +9,11 @@
 //  100 will make printing smooth
 $fn = 100;
 
-use <qr.scad>
+include <wheel-data.scad>
 
-qr_size = 45;
-qr_height = 2;
-
-wall_width = 3;
-
-wheel_width = 9;
-wheel_radius = sqrt(2 * pow(qr_size / 2, 2)) + wall_width / 2;
-
-motor_shaft_radius = 3.7;
-motor_shaft_flat_width = 4.8;
-
-tread_radius = 4 / 2;
-
-module mounting_screw_flat(){
-  circle(0.9);}
-
-module motor_shaft_flat(radius, flat_width){
-  intersection(){
-    circle(radius);
-    square([flat_width, radius * 2], center = true);}}
-
-module motor_shaft(radius,
-                   flat_width,
-                   shaft_length){
-  linear_extrude(height = shaft_length){
-    motor_shaft_flat(radius, flat_width);}}
-
-module rim(radius, wall_width, wheel_width){
-  linear_extrude(height = wheel_width){
-    difference(){
-      circle(radius);
-      circle(radius - wall_width);}}}
-
-module motor_shaft_holder_flat(radius, flat_width, wall_width){
-  difference(){
-    motor_shaft_flat(radius + wall_width,
-                     flat_width + wall_width);
-    motor_shaft_flat(radius, flat_width);}}
-
-module motor_shaft_holder(radius, flat_width, wall_width, height){
-  linear_extrude(height = height){
-    motor_shaft_holder_flat(radius, flat_width, wall_width);}}
-
-module tread(wheel_radius, tread_radius){
-  rotate_extrude(convexity = 10){
-    translate([wheel_radius, 0]){
-      circle(tread_radius);}}}
-
-module wheel_black(radius,
-                   width,
-                   shaft_radius,
-                   shaft_flat_width,
-                   wall_width,
-                   tread_radius){
-  color("black"){
-    difference(){
-      rim(radius, wall_width, width);
-      translate([0, 0, width / 2]){
-        tread(radius, tread_radius);}}
-    linear_extrude(height = qr_height){
-      difference(){
-        qr_black_flat();
-        mounting_screw_flat();}}
-    translate([0, 0, qr_height]){
-      motor_shaft_holder(shaft_radius,
-                         shaft_flat_width,
-                         wall_width,
-                         width - qr_height);}}}
-
-module wheel_white(){
-  color("white"){
-    linear_extrude(height = qr_height){
-      difference(){
-        qr_white_flat();
-        mounting_screw_flat();}}}}
-
-module wheel(radius,
-             width,
-             shaft_radius,
-             shaft_flat_width,
-             wall_width,
-             tread_radius){
-  wheel_black(radius,
-              width,
-              shaft_radius,
-              shaft_flat_width,
-              wall_width,
-              tread_radius);
-  wheel_white();}
-
-module wheel_solid(radius,
-                   width,
-                   shaft_radius,
-                   shaft_flat_width,
-                   wall_width,
-                   tread_radius){
-  difference(){
-    rim(radius, wall_width * 2, width);
-    translate([0, 0, width / 2]){
-      tread(radius, tread_radius);}}
-  linear_extrude(height = qr_height){
-    difference (){
-      square(qr_size, center = true);
-      mounting_screw_flat(); } }
-  translate([0, 0, qr_height]){
-    motor_shaft_holder(shaft_radius,
-                       shaft_flat_width,
-                       wall_width,
-                       width - qr_height);}}
-
-/*
 wheel(wheel_radius,
       wheel_width,
       motor_shaft_radius,
       motor_shaft_flat_width,
       wall_width,
       tread_radius);
-*/
-
-wheel_solid(wheel_radius,
-            wheel_width,
-            motor_shaft_radius,
-            motor_shaft_flat_width,
-            wall_width,
-            tread_radius);