+++ /dev/null
-### Phase 1: Arduino + Blinky LED's:
-
-Goals:
-
-* Cut peg board to size using hack saw
-* Get Arduino IDE installed on laptop.
-* Drill Arduino mounting holes in peg board
-* Mount Arduino to peg board using screws
-* Mount Mini Breadboard to peg board
-* Install LED + resistor on breadboard
-* Hook up LED to Arduino
-* Download Blinky LED program
-
-Bill of Materials:
-
-* 1 Arduino(tm) board + USB Cable (SainSmart: 20-011-110: ~$14/10)
-* 1 Mini BreadBoard (Ebay: ~$3/10)
-* 1 Breadboard cables (Ebay: ~$4/10)
-* 1 4in x 5in peg board to mount arduino + miniboard
-* 4 small squares of double sided tape
-* 3 #4-40 Phillips 1/2" flat-head screws
-* 6 #4-40 hex nuts
-* 3 #4 lock washers
-* 2 Red LED's
-* 2 Yellow LED's
-* 2 Green LED's
-* 6 330 Ohm Resistors
-
-Required Tools:
-
-* 1 Safety glasses!!!
-* 1 Laptop Windows or MacOS or Linux
-* 1 Hack saw (to cut peg board)
-* 1 Phillips screw driver
-* 1 Drill + Drill Bits
-* 1 Pliers