define wiring in separate file

[challenge-bot] / build-stages / h_stay_on_table / h_stay_on_table.ino

diff --git a/build-stages/h_stay_on_table/h_stay_on_table.ino b/build-stages/h_stay_on_table/h_stay_on_table.ino
index 73f9e9b61ccaf1b3d0e76df1b319e6efdbbba46a..fcdfa34315ab83cd214dbfb4434b7958c36a7f14 100644 (file)
--- a/build-stages/h_stay_on_table/h_stay_on_table.ino
+++ b/build-stages/h_stay_on_table/h_stay_on_table.ino
@@ -13,20 +13,7 @@
     along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-// define which pins are connected to which components
-int right_motor_speed_pin = 3; // orange wire
-int right_motor_forward_pin = 4; // brown
-int right_motor_backward_pin = 5; // purple
-
-int right_echo_pin = 6; // white
-int right_trigger_pin = 7; // blue
-
-int left_motor_speed_pin = 8; // orange
-int left_motor_forward_pin = 9; // brown
-int left_motor_backward_pin = 10; // purple
-
-int left_echo_pin = 11; // white
-int left_trigger_pin = 12; // blue
+#include "bot_map.h"
 
 void on(int pin){
   digitalWrite(pin, HIGH);}
@@ -48,6 +35,7 @@ void set_motor(int speed_pin,
   else{ // speed is 0
     off(forward_pin);
     off(backward_pin);}
+  // since speed has been set positive, no need to check if speed < -255.
   if(speed > 255){
     speed = 255;}
   analogWrite(speed_pin, speed);}
@@ -124,10 +112,10 @@ void loop(){
 
   // adjust this number as necessary for your robot.
   // it represents how far the table is from your sonar sensor.
-  // larger values mean larger distance.  default is 400
-  int right_max_ping_time_over_table = 400;
-  int left_max_ping_time_over_table = 400;
-  int backup_time = 2000;
+  // larger values mean larger distance.  default is 800
+  int right_max_ping_time_over_table = 800;
+  int left_max_ping_time_over_table = 800;
+  int backup_time = 1000;
   // the exact amount of time for turning around might need
   // twerking for your robot.  the default value is 3200
   int turn_around_time = 3200;
@@ -135,6 +123,17 @@ void loop(){
   int actual_left_ping_time = ping(left_trigger_pin, left_echo_pin);
   int actual_right_ping_time = ping(right_trigger_pin, right_echo_pin);
 
+  /* int left_led_value = (int)(actual_left_ping_time / 16.0); */
+  /* int right_led_value = (int)(actual_right_ping_time / 16.0); */
+
+  /* Serial.print("left led value = "); */
+  /* Serial.print(left_led_value); */
+  /* Serial.print(", right led value = "); */
+  /* Serial.print(right_led_value); */
+
+  /* analogWrite(left_led_pin, left_led_value); */
+  /* analogWrite(right_led_pin, right_led_value); */
+
   Serial.print("left ping = ");
   Serial.print(actual_left_ping_time);
   Serial.print("\tright_ping = ");