:title [mechanical]
(section
:title [arduino to deck]
+ (p [let's attach the arduino to the deck.])
(subsection
:title [required materials]
(p [you will need the things in this picture.
was bigger than the body and smaller than the thread.
we will choose the biggest drill bit that fits through
the hole on the arduino.])
- (p [here's a diagram of a screw]
- (figure :legend "screw" (image :file "arduino-to-deck/screw.png"))))
+ (p [here's a cross section of a screw in the deck]
+ (figure :legend "screw cross section"
+ (image :file
+ "arduino-to-deck/screw-cross-section.png"))))
(subsubsection
:title [inserting drill bit]
(p (figure :legend "arduino to deck / insert bit"
make sure that the teeth end up gripping the flat part of
the drill bit.]))
(subsubsection
- :title [holding drill])
+ :title [holding drill]
+ (p [hold the drill with one hand on the handle and trigger.
+ put the other hand on the orange nozzle, before the
+ black spinning part.]))
(subsubsection
:title [arduino placement]
(p [the arduino should be placed as shown in this picture.]
(p [the "#6" part of "#6-32x3/8\"" is how big around the bolt is.
it is related to wire gauge.
bigger numbers mean larger screw.
- smaller numbers means smaller screws.])
+ smaller numbers means smaller screws.]
+ (figure :legend "arduino to deck / #6-32 screw"
+ (image :file
+ "arduino-to-deck/6-32-screw.png")))
(p [check
,(itemize
(item