:title [mechanical]
(section
:title [arduino to deck]
+ (subsection
+ :title [required materials]
+ (p [you will need the things in this picture.
+ ,(figure :legend "arduino to deck / required materials"
+ (image :file "arduino-to-deck/0-required-materials.png"))
+ ,(itemize
+ (item [medical kit with bandages])
+ (item [safety goggles])
+ (item [drill bit \(we will determine size in a moment\)])
+ (item [drill])
+ (item [alan wrench])
+ (item [wood block])
+ (item [arduino])
+ (item [#6-32x3/8\", four of them]))]))
(subsection
:title [first hole]
(subsubsection
(subsubsection
:title [arduino placement]
(p [the arduino should be placed as shown in this picture.]
- (figure :legend "arduino placement on deck"
+ (figure :legend "arduino to deck / place arduino"
(image :file "arduino-to-deck/3-place-arduino.png"))
+ [here's a closeup]
+ (figure :legend "arduino to deck / place arduino closeup"
+ (image :file "arduino-to-deck/4-place-arduino-closeup.png"))
[the top edge of the arduino should line up with the underside
- of the holes ]))
+ of the holes closest to the edge of the deck.
+ on the arduino, there's a hole on the top left.
+ that hole should be mid-way between two of the holes in the
+ grid of holes on the deck.
+ put the arduino hole between the third and fourth holes
+ from the left side of the deck.]))
(subsubsection
:title [drilling]))
(subsection